F5 BIG-IP TMOS Firewall Security Technical Implementation Guide

Overview

VersionDateFinding Count (14)Downloads
12024-09-09CAT I (High): 3CAT II (Medium): 9CAT III (Low): 2
STIG Description
This Security Technical Implementation Guide is published as a tool to improve the security of Department of Defense (DOD) information systems. The requirements are derived from the National Institute of Standards and Technology (NIST) 800-53 and related documents. Comments or proposed revisions to this document should be sent via email to the following address: disa.stig_spt@mail.mil.
ClassifiedPublicSensitive
I - Mission Critical ClassifiedI - Mission Critical PublicI - Mission Critical Sensitive
II - Mission Support ClassifiedII - Mission Support PublicII - Mission Support Sensitive
III - Administrative ClassifiedIII - Administrative PublicIII - Administrative Sensitive

Findings - MAC III - Administrative Classified

Finding IDSeverityTitleDescription
V-266254
LOWMEDIUMHIGH
The F5 BIG-IP appliance that filters traffic from the VPN access points must be configured with organization-defined filtering rules that apply to the monitoring of remote access traffic.Remote access devices (such as those providing remote access to network devices and information systems) that lack automated capabilities increase ris...
V-266256
LOWMEDIUMHIGH
The F5 BIG-IP appliance must generate traffic log entries containing information to establish the details of the event, including success or failure of the application of the firewall rule.Without establishing what type of event occurred, it would be difficult to establish, correlate, and investigate the events leading up to an outage or...
V-266258
LOWMEDIUMHIGH
The F5 BIG-IP appliance must be configured to use TCP when sending log records to the central audit server.If the default UDP protocol is used for communication between the hosts and devices to the central log server, then log records that do not reach the ...
V-266259
LOWMEDIUMHIGH
The F5 BIG-IP appliance must be configured to restrict itself from accepting outbound packets that contain an illegitimate address in the source address field via an egress filter or by enabling Unicast Reverse Path Forwarding (uRPF).A compromised host in an enclave can be used by a malicious platform to launch cyber attacks on third parties. This is a common practice in "botnets",...
V-266263
LOWMEDIUMHIGH
The F5 BIG-IP appliance must be configured to inspect all inbound and outbound traffic at the application layer.Application inspection enables the firewall to control traffic based on different parameters that exist within the packets such as enforcing applicati...
V-266264
LOWMEDIUMHIGH
The F5 BIG-IP appliance must be configured to filter inbound traffic on all external interfaces.Unrestricted traffic to the trusted networks may contain malicious traffic that poses a threat to an enclave or to other connected networks. Additiona...
V-266265
LOWMEDIUMHIGH
The F5 BIG-IP appliance must be configured to filter outbound traffic on all internal interfaces.If outbound communications traffic is not filtered, hostile activity intended to harm other networks or packets from networks destined to unauthorized...
V-266266
LOWMEDIUMHIGH
The F5 BIG-IP appliance must be configured to block all outbound management traffic.The management network must still have its own subnet to enforce control and access boundaries provided by Layer 3 network nodes such as routers and f...
V-266267
LOWMEDIUMHIGH
The BIG-IP appliance perimeter firewall must be configured to filter traffic destined to the enclave in accordance with the specific traffic that is approved and registered in the Ports, Protocols, and Services Management (PPSM) Category Assurance List (CAL) and vulnerability assessments.The enclave's internal network contains the servers where mission-critical data and applications reside. Malicious traffic can enter from an external ...
V-266257
LOWMEDIUMHIGH
In the event that communication with the central audit server is lost, the F5 BIG-IP appliance must continue to queue traffic log records locally.It is critical that when the network element is at risk of failing to process traffic logs as required, it takes action to mitigate the failure. Audit...
V-266262
LOWMEDIUMHIGH
The F5 BIG-IP appliance must generate an alert that can be forwarded to, at a minimum, the information system security officer (ISSO) and information system security manager (ISSM) when denial-of-service (DoS) incidents are detected.Without an alert, security personnel may be unaware of major detection incidents that require immediate action, and this delay may result in the loss ...
V-266255
LOWMEDIUMHIGH
The F5 BIG-IP appliance must be configured to use filters that use packet headers and packet attributes, including source and destination IP addresses and ports, to prevent the flow of unauthorized or suspicious traffic between interconnected networks with different security policies, including perimeter firewalls and server VLANs.Blocking or restricting detected harmful or suspicious communications between interconnected networks enforces approved authorizations for controlling...
V-266260
LOWMEDIUMHIGH
The F5 BIG-IP appliance must employ filters that prevent or limit the effects of all types of commonly known denial-of-service (DoS) attacks, including flooding, packet sweeps, and unauthorized port scanning.Not configuring a key boundary security protection device such as the firewall against commonly known attacks is an immediate threat to the protected ...
V-266261
LOWMEDIUMHIGH
The F5 BIG-IP appliance must deny network communications traffic by default and allow network communications traffic by exception (i.e., deny all, permit by exception).To prevent malicious or accidental leakage of traffic, organizations must implement a deny-by-default security posture at the network perimeter. Such ...