OpenControls Logo

STIG Viewer

STIGViewer Support

CICS System Initialization Table (SIT) parameter values must be specified in accordance with proper security requirements.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-224494ZCIC0030SV-224494r1041297_ruleCCI-000015medium
Description
The CICS SIT is used to define system operation and configuration parameters of a CICS system. Several of these parameters control the security within a CICS region. Failure to code the appropriate values could result in unexpected operations and degraded security. This exposure may result in unauthorized access impacting the confidentiality, integrity, and availability of the CICS region, applications, and customer data.
STIGDate
z/OS IBM CICS Transaction Server for RACF Security Technical Implementation Guide2024-12-16

Related Frameworks

2 mappings across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-01Configuration Management Program
1.00
CFG-03Least Functionality
1.00
IAC-15.1Automated System Account Management (Directory Services)
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (90) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-10Concurrent Session Control
1.00
AC-11Device Lock
1.00
AC-12Session Termination
1.00
AC-17(1)Monitoring and Control
1.00
AC-17(10)Authenticate Remote Commands
1.00
AC-17(9)Disconnect or Disable Access
1.00
AC-18(1)Authentication and Encryption
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(10)Shared and Group Account Credential Change
1.00
AC-2(11)Usage Conditions
1.00

+80 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.4.6
1.00
CCI2 mappings
CCI-000015
1.00
CCI-000381
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

PR.PS-01
1.00
PR.PS-05
1.00

Who does this work

5 NICE work roles and 5 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-224494r1041297_chk)

Refer to the following report produced by the z/OS Data Collection: - EXAM.RPT(CICSPROC) Refer to the following report produced by the CICS Data Collection: - CICS.RPT(DFHSITxx) Refer to the CICS Systems Programmer Worksheets filled out from previous vulnerability ZCIC0010. Refer to the CICS region SYSLOG - (Alternate source of SIT parameters) be sure to process DFHSIT based on the order specified. The system initialization parameters are processed in the following order, with later system initialization parameter values overriding those specified earlier. CICS system initialization parameters are specified in the following ways: - In the system initialization table, loaded from a library in the STEPLIB concatenation of the CICS startup procedure. - In the PARM parameter of the EXEC PGM=DFHSIP statement of the CICS startup procedure. - In the SYSIN data set defined in the startup procedure (but only if SYSIN is coded in the PARM parameter). Ensure the following CICS System Initialization Table (SIT) parameter settings are specified for each CICS region. If the following guidance is true, this is not a finding. ___ SEC=YES - If SEC is not coded in the CICS region startup JCL, go to offset x'117' from the beginning on the SIT dump (record sequence number - 6) for a length of 1. This is the security byte flag. Below is the hex and bit settings for this flag. X'80' EQU B'10000000' External Security Requested ___ DFLTUSER=<parameter> - If DFLTUSER is not coded in the CICS region startup JCL, go to offset x'118' from the beginning on the SIT dump (record sequence number - 6) for a length of 8 bytes. The value will be the CICS default userid. ___ XUSER=YES - If XUSER is not coded in the CICS region startup JCL, go to offset x'117' from the beginning on the SIT dump (record sequence number - 6) for a length of 1. This is the security byte flag. Below is the hex and bit settings for this flag. X'04' EQU B'00000100' Surrogate User Checking required ___ SNSCOPE=NONE|CICS|MVSIMAGE|SYSPLEX - If SNSCOPE is not coded in the CICS region startup JCL, go to offset x'124' from the beginning on the SIT dump (record sequence number - 6) for a length of 1. This is the signon scope byte flag. Ensure that users cannot sign on to more than one CICS production region within the scope of a single CICS region, a single z/OS image, or a sysplex. Below are listed the hex and bit settings for this flag: X'01' EQU 1 SIGNON SCOPE = NONE X'02' EQU 2 SIGNON SCOPE = CICS X'03' EQU 3 SIGNON SCOPE = MVSIMAGE X'04' EQU 4 SIGNON SCOPE = SYSPLEX Note: SNSCOPE=NONE is only allowed with test/development regions. ___ XTRAN=YES|ssrrTRN - If XTRAN is not coded in the CICS region startup JCL, go to offset x'CA' from the beginning on the SIT dump (record sequence number - 6) for a length of 7 bytes. The value will be the resource class name used for that region. If XTRAN=YES is coded, c'CICSTRN' will be present. ___ SECPRFX=YES - If SECPRFX is not coded in the CICS region startup JCL, go to offset x'117' from the beginning on the SIT dump (record sequence number - 6) for a length of 1. This is the security byte flag. Below are the hex and bit settings for this flag. X'40' EQU B'01000000' Resource Prefix Required If XTRAN=ssrrTRN is specified, resource prefixing (e.g., SECPRFX=YES) is not required to be enabled. Also, CICS regions cannot share the same resource class if resource prefixing is not active.

Fix Text (F-26165r868324_fix)

Ensure that CICS System Initialization Table (SIT) parameter values are specified using the following guidance. The system initialization parameters are processed in the following order, with later system initialization parameter values overriding those specified earlier. CICS system initialization parameters are specified in the following ways: In the system initialization table, loaded from a library in the STEPLIB concatenation of the CICS startup procedure. In the PARM parameter of the EXEC PGM=DFHSIP statement of the CICS startup procedure. In the SYSIN data set defined in the startup procedure (but only if SYSIN is coded in the PARM parameter). SEC=YES - If SEC is not coded in the CICS region startup JCL, go to offset x'117' from the beginning on the SIT dump (record sequence number - 6) for a length of 1. This is the security byte flag. Below are is the hex and bit settings for this flag. X'80' EQU B'10000000' External Security Requested <<=== X'40' EQU B'01000000' Resource Prefix Required X'10' EQU B'00010000' RACLIST class APPCLU required X'08' EQU B'00001000' ESM INSTLN data is required X'04' EQU B'00000100' Surrogate User Checking required X'02' EQU B'00000010' Always enact resource check X'01' EQU B'00000001' Always enact command check DFLTUSER=<parameter> - If DFLTUSER is not coded in the CICS region startup JCL, go to offset x'118' from the beginning on the SIT dump (record sequence number - 6) for a length of 8 bytes. The value will be the CICS default userid. XUSER=YES - If XUSER is not coded in the CICS region startup JCL, go to offset x'117' from the beginning on the SIT dump (record sequence number - 6) for a length of 1. This is the security byte flag. Below is the hex and bit settings for this flag. X'80' EQU B'10000000' External Security Requested X'40' EQU B'01000000' Resource Prefix Required X'10' EQU B'00010000' RACLIST class APPCLU required X'08' EQU B'00001000' ESM INSTLN data is required X'04' EQU B'00000100' Surrogate User Checking required <<=== X'02' EQU B'00000010' Always enact resource check X'01' EQU B'00000001' Always enact command check SNSCOPE=NONE|CICS|MVSIMAGE|SYSPLEX If SNSCOPE is not coded in the CICS region startup JCL, go to offset x'124' from the beginning on the SIT dump (record sequence number - 6) for a length of 1. This is the signon scope byte flag. Ensure that users cannot sign on to more than one CICS production region within the scope of a single CICS region, a single z/OS image, or a sysplex. Below are the hex settings for this flag: X'01' EQU 1 SIGNON SCOPE = NONE X'02' EQU 2 SIGNON SCOPE = CICS X'03' EQU 3 SIGNON SCOPE = MVSIMAGE X'04' EQU 4 SIGNON SCOPE = SYSPLEX Note: SNSCOPE=NONE is only allowed with test/development regions. XTRAN=YES|ssrrTRN - If XTRAN is not coded in the CICS region startup JCL, go to offset x'CA' from the beginning on the SIT dump (record sequence number - 6) for a length of 7 bytes. The value will be the resource class name used for that region. If XTRAN=YES is coded, c'CICSTRN' will be present. SECPRFX=YES - If SECPRFX is not coded in the CICS region startup JCL, go to offset x'117' from the beginning on the SIT dump (record sequence number - 6) for a length of 1. This is the security byte flag. Below are the hex and bit settings for this flag with the resource prefixing setting bolded: X'80' EQU B'10000000' External Security Requested X'40' EQU B'01000000' Resource Prefix Required <<=== X'10' EQU B'00010000' RACLIST class APPCLU required X'08' EQU B'00001000' ESM INSTLN data is required X'04' EQU B'00000100' Surrogate User Checking required X'02' EQU B'00000010' Always enact resource check X'01' EQU B'00000001' Always enact command check Note: If XTRAN=ssrrTRN is specified, resource prefixing (e.g., SECPRFX=YES) is not required to be enabled. Also, CICS regions cannot share the same resource class if resource prefixing is not active.