The Photon operating system must not send IPv4 Internet Control Message Protocol (ICMP) redirects.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-258890PHTN-40-000227SV-258890r933731_ruleCCI-000366medium
Description
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table, possibly revealing portions of the network topology.
STIGDate
VMware vSphere 8.0 vCenter Appliance Photon OS 4.0 Security Technical Implementation Guide2023-10-29

Related Frameworks

4 paths across 3 frameworks
NIST 800-531 mapping
CM-6
1.00
  • DISA · V1R1 · disa_xccdf · related
  • DISA · 2025-01-23 · disa_cci_list · equivalent
NIST 800-1712 mappings
3.4.1
1.00
  • DISA · V1R1 · disa_xccdf · related
  • DISA · 2025-01-23 · disa_cci_list · equivalent
  • NIST · Rev 2 (Feb 2020, errata Jan 2021) · nist_800_171_app_d · equivalent
3.4.2
1.00
  • DISA · V1R1 · disa_xccdf · related
  • DISA · 2025-01-23 · disa_cci_list · equivalent
  • NIST · Rev 2 (Feb 2020, errata Jan 2021) · nist_800_171_app_d · equivalent
CCI1 mapping
CCI-000366
1.00
  • DISA · V1R1 · disa_xccdf · related

Details

Check Text (C-258890r933731_chk)

At the command line, run the following command to verify ICMP send redirects are not accepted: # /sbin/sysctl -a --pattern "net.ipv4.conf.(all|default).send_redirects" Expected result: net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 If the "send_redirects" kernel parameters are not set to "0", this is a finding.

Fix Text (F-62539r933730_fix)

Navigate to and open: /etc/sysctl.d/zz-stig-hardening.conf Add or update the following lines: net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 At the command line, run the following command to load the new configuration: # /sbin/sysctl --load /etc/sysctl.d/zz-stig-hardening.conf Note: If the file zz-stig-hardening.conf does not exist, it must be created.