OpenControls Logo

STIG Viewer

STIGViewer Support

The vCenter Server must not configure all port groups to virtual local area network (VLAN) values reserved by upstream physical switches.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-258941VCSA-80-000274SV-258941r961863_ruleCCI-000366medium
Description
Certain physical switches reserve certain VLAN IDs for internal purposes and often disallow traffic configured to these values. For example, Cisco Catalyst switches typically reserve VLANs 1001 to 1024 and 4094, while Nexus switches typically reserve 3968 to 4094. Check with the documentation for the organization's specific switch. Using a reserved VLAN might result in a denial of service on the network.
STIGDate
VMware vSphere 8.0 vCenter Security Technical Implementation Guide2026-05-23

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (8) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-01Configuration Management Program
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
MON-01Continuous Monitoring
1.00
MON-01.7File Integrity Monitoring (FIM)
1.00
CFG-02Secure Baseline Configurations
0.50
CFG-02.7Approved Configuration Deviations
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (100) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-12Session Termination
1.00
AC-16(1)Dynamic Attribute Association
1.00
AC-17(1)Monitoring and Control
1.00
AC-2Account Management
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-24(1)Transmit Access Authorization Information
1.00
AC-25Reference Monitor
1.00

+90 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.4.1
1.00
3.4.2
1.00
CCI1 mapping
CCI-000366
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
PR.PS-01
1.00
PR.DS-10
0.50
PR.PSPlatform Security
0.50
PR.PS-05
0.50

Who does this work

10 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-258941r961863_chk)

If distributed switches are not used, this is not applicable. From the vSphere Client, go to "Networking". Select a distributed switch >> Select a distributed port group >> Configure >> Settings >> Policies. Review the port group VLAN tags and verify that they are not set to a reserved VLAN ID. or From a PowerCLI command prompt while connected to the vCenter server, run the following command: Get-VDPortgroup | select Name, VlanConfiguration If any port group is configured with a reserved VLAN ID, this is a finding.

Fix Text (F-62590r934480_fix)

From the vSphere Client, go to "Networking". Select a distributed switch >> Select a distributed port group >> Configure >> Settings >> Policies. Click "Edit". Click the "VLAN" tab. Change the VLAN ID to an unreserved VLAN ID. Click "OK". or From a PowerCLI command prompt while connected to the vCenter server, run the following command: Get-VDPortgroup "portgroup name" | Set-VDVlanConfiguration -VlanId "New VLAN#"