OpenControls Logo

STIG Viewer

STIGViewer Support

The ESXi host OpenSLP service must be disabled.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-258786ESXI-80-000231SV-258786r933419_ruleCCI-000366medium
Description
OpenSLP implements the Service Location Protocol to help CIM clients discover CIM servers over TCP 427. This service is not widely needed and has had vulnerabilities exposed in the past. To reduce attack surface area and following the minimum functionality principal, the OpenSLP service must be disabled unless explicitly needed and approved. Note: Disabling the OpenSLP service may affect monitoring and third-party systems that use the WBEM DTMF protocols.
STIGDate
VMware vSphere 8.0 ESXi Security Technical Implementation Guide2023-10-11

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (8) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-01Configuration Management Program
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
MON-01Continuous Monitoring
1.00
MON-01.7File Integrity Monitoring (FIM)
1.00
CFG-02Secure Baseline Configurations
0.50
CFG-02.7Approved Configuration Deviations
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (100) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-12Session Termination
1.00
AC-16(1)Dynamic Attribute Association
1.00
AC-17(1)Monitoring and Control
1.00
AC-2Account Management
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-24(1)Transmit Access Authorization Information
1.00
AC-25Reference Monitor
1.00

+90 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.4.1
1.00
3.4.2
1.00
CCI1 mapping
CCI-000366
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
PR.PS-01
1.00
PR.DS-10
0.50
PR.PSPlatform Security
0.50
PR.PS-05
0.50

Who does this work

10 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-258786r933419_chk)

From the vSphere Client go to Hosts and Clusters. Select the ESXi Host >> Configure >> System >> Services. Under "Services", locate the "slpd" service and verify it is "Stopped" and the "Startup Policy" is set to "Start and stop manually". or From a PowerCLI command prompt while connected to the ESXi host, run the following command: Get-VMHost | Get-VMHostService | Where {$_.Label -eq "slpd"} If the slpd service does not have a "Policy" of "off" or is running, this is a finding.

Fix Text (F-62435r933418_fix)

From the vSphere Client go to Hosts and Clusters. Select the ESXi Host >> Configure >> System >> Services. Under "Services" select the "slpd" service and click the "Stop" button. Click "Edit Startup policy..." and select the "Start and stop manually" radio button. Click "OK". or From a PowerCLI command prompt while connected to the ESXi host, run the following commands: Get-VMHost | Get-VMHostService | Where {$_.Label -eq "slpd"} | Set-VMHostService -Policy Off Get-VMHost | Get-VMHostService | Where {$_.Label -eq "slpd"} | Stop-VMHostService