OpenControls Logo

STIG Viewer

STIGViewer Support

Simple Network Management Protocol (SNMP) must be configured properly on the ESXi host.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-256414ESXI-70-000053SV-256414r959010_ruleCCI-000366medium
Description
If SNMP is not being used, it must remain disabled. If it is being used, the proper trap destination must be configured. If SNMP is not properly configured, monitoring information can be sent to a malicious host that can use this information to plan an attack.
STIGDate
VMware vSphere 7.0 ESXi Security Technical Implementation Guide2025-02-11

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (8) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-01Configuration Management Program
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
MON-01Continuous Monitoring
1.00
MON-01.7File Integrity Monitoring (FIM)
1.00
CFG-02Secure Baseline Configurations
0.50
CFG-02.7Approved Configuration Deviations
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (100) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-12Session Termination
1.00
AC-16(1)Dynamic Attribute Association
1.00
AC-17(1)Monitoring and Control
1.00
AC-2Account Management
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-24(1)Transmit Access Authorization Information
1.00
AC-25Reference Monitor
1.00

+90 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.4.1
1.00
3.4.2
1.00
CCI1 mapping
CCI-000366
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
PR.PS-01
1.00
PR.DS-10
0.50
PR.PSPlatform Security
0.50
PR.PS-05
0.50

Who does this work

10 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-256414r959010_chk)

From an ESXi shell, run the following command: # esxcli system snmp get or From a PowerCLI command prompt while connected to the ESXi host, run the following command: Get-VMHostSnmp | Select * If SNMP is not in use and is enabled, this is a finding. If SNMP is enabled and read-only communities are set to "public", this is a finding. If SNMP is enabled and is not using v3 targets, this is a finding. Note: SNMP v3 targets can only be viewed and configured via the "esxcli" command.

Fix Text (F-60032r886022_fix)

To disable SNMP from an ESXi shell, run the following command: # esxcli system snmp set -e no or From a PowerCLI command prompt while connected to the ESXi Host: Get-VMHostSnmp | Set-VMHostSnmp -Enabled $false To configure SNMP for v3 targets, use the "esxcli system snmp set" command set locally on the host or remotely via PowerCLI.