OpenControls Logo

STIG Viewer

STIGViewer Support

The ESXi host must produce audit records containing information to establish what type of events occurred.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-256396ESXI-70-000030SV-256396r958412_ruleCCI-000130medium
Description
Without establishing what types of events occurred, it would be difficult to establish, correlate, and investigate the events leading up to an outage or attack. Satisfies: SRG-OS-000037-VMM-000150, SRG-OS-000063-VMM-000310
STIGDate
VMware vSphere 7.0 ESXi Security Technical Implementation Guide2025-02-11

Related Frameworks

2 mappings across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (15) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
MON-01Continuous Monitoring
1.00
MON-01.1Intrusion Detection & Prevention Systems (IDS & IPS)
1.00
MON-01.3Inbound & Outbound Communications Traffic
1.00
MON-01.4System Generated Alerts
1.00
MON-01.7File Integrity Monitoring (FIM)
1.00
MON-01.8Security Event Monitoring
1.00
MON-03Content of Event Logs
1.00

+5 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (64) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-16Security and Privacy Attributes
1.00
AC-17(1)Monitoring and Control
1.00
AC-17(10)Authenticate Remote Commands
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00
AC-3(3)Mandatory Access Control
1.00
AC-4Information Flow Enforcement
1.00

+54 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.3.1
1.00
3.3.2
1.00
CCI2 mappings
CCI-000130
1.00
CCI-000171
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (4) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-01
1.00
DE.CM-03
1.00
DE.CM-09
1.00
PR.PS-04
1.00

Who does this work

12 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-256396r958412_chk)

From the vSphere Client, go to Hosts and Clusters. Select the ESXi Host >> Configure >> System >> Advanced System Settings. Select the "Config.HostAgent.log.level" value and verify it is set to "info". or From a PowerCLI command prompt while connected to the ESXi host, run the following command: Get-VMHost | Get-AdvancedSetting -Name Config.HostAgent.log.level If the "Config.HostAgent.log.level" setting is not set to "info", this is a finding. Note: Verbose logging level is acceptable for troubleshooting purposes.

Fix Text (F-60014r885968_fix)

From the vSphere Client, go to Hosts and Clusters. Select the ESXi Host >> Configure >> System >> Advanced System Settings. Click "Edit". Select the "Config.HostAgent.log.level" value and configure it to "info". or From a PowerCLI command prompt while connected to the ESXi host, run the following command: Get-VMHost | Get-AdvancedSetting -Name Config.HostAgent.log.level | Set-AdvancedSetting -Value "info"