OpenControls Logo

STIG Viewer

STIGViewer Support

The NSX Manager must enable the global FIPS compliance mode for load balancers.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-265355NMGR-4X-000099SV-265355r994288_ruleCCI-000366medium
Description
If unsecured protocols (lacking cryptographic mechanisms) are used for load balancing, the contents of those sessions will be susceptible to eavesdropping, potentially putting sensitive data at risk of compromise.
STIGDate
VMware NSX 4.x Manager NDM Security Technical Implementation Guide2024-12-13

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (8) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-01Configuration Management Program
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
MON-01Continuous Monitoring
1.00
MON-01.7File Integrity Monitoring (FIM)
1.00
CFG-02Secure Baseline Configurations
0.50
CFG-02.7Approved Configuration Deviations
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (100) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-12Session Termination
1.00
AC-16(1)Dynamic Attribute Association
1.00
AC-17(1)Monitoring and Control
1.00
AC-2Account Management
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-24(1)Transmit Access Authorization Information
1.00
AC-25Reference Monitor
1.00

+90 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.4.1
1.00
3.4.2
1.00
CCI1 mapping
CCI-000366
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
PR.PS-01
1.00
PR.DS-10
0.50
PR.PSPlatform Security
0.50
PR.PS-05
0.50

Who does this work

10 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-265355r994288_chk)

From the NSX Manager web interface, go to the Home >> Monitoring Dashboards >> Compliance Report. Review the compliance report for code 72024 with description load balancer FIPS global setting disabled. Note: This may also be checked via the API call GET https://<nsx-mgr>/policy/api/v1/infra/global-config If the global FIPS setting is disabled for load balancers, this is a finding.

Fix Text (F-69180r994287_fix)

Execute the following API call using curl or another REST API client: PUT https://<nsx-mgr>/policy/api/v1/infra/global-config Example request body: { "fips": { "lb_fips_enabled": true }, "resource_type": "GlobalConfig", "_revision": 2 } The global setting is used when the new load balancer instances are created. Changing the setting does not affect existing load balancer instances. To update existing load balancers to use this setting, do the following: From the NSX Manager web interface, go to the Networking >> Load Balancing and then click "Edit" on the target load balancer. In the attachment field, click the "X" to detach the load balancer from its current Gateway and click "Save". Edit the target load balancer again, reattach it to its Gateway, and then click "Save". Caution: Detaching a load balancer from the Tier-1 gateway results in a traffic interruption for the load balancer instance.