OpenControls Logo

STIG Viewer

STIGViewer Support

The NSX Manager must retain the Standard Mandatory DOD Notice and Consent Banner on the screen until the administrator acknowledges the usage conditions and takes explicit actions to log on for further access.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-265295NMGR-4X-000014SV-265295r994108_ruleCCI-000050medium
Description
The banner must be acknowledged by the administrator prior to the device allowing the administrator access to the network device. This provides assurance that the administrator has seen the message and accepted the conditions for access. If the consent banner is not acknowledged by the administrator, DOD will not be in compliance with system use notifications required by law. To establish acceptance of the network administration policy, a click-through banner at management session logon is required. The device must prevent further activity until the administrator executes a positive action to manifest agreement. In the case of CLI access using a terminal client, entering the username and password when the banner is presented is considered an explicit action of acknowledgement. Entering the username, viewing the banner, then entering the password is also acceptable.
STIGDate
VMware NSX 4.x Manager NDM Security Technical Implementation Guide2024-12-13

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

SEA-18System Use Notification (Logon Banner)
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (16) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-2(1)Automated System Account Management
1.00
AC-2(10)Shared and Group Account Credential Change
1.00
AC-2(11)Usage Conditions
1.00
AC-2(2)Automated Temporary and Emergency Account Management
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00
AC-7Unsuccessful Logon Attempts
1.00
AC-8System Use Notification
1.00
IA-2(1)Multi-factor Authentication to Privileged Accounts
1.00

+6 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.1.9
1.00
CCI1 mapping
CCI-000050
1.00

Details

Check Text (C-265295r994108_chk)

From the NSX Manager web interface, go to System >> Settings >> General Settings >> User Interface. Review the Login Consent Settings. Verify "Login Consent" is not On. Verify "Require Explicit User Consent" is set to Yes. If the Standard Mandatory DOD Notice and Consent Banner is not retained on the screen until the administrator acknowledges the usage conditions and takes explicit actions to log on for further access, this is a finding.

Fix Text (F-69120r994107_fix)

From the NSX Manager web interface, go to System >> Settings >> General Settings >> User Interface. Under Login Consent Settings, click "Edit". Toggle "Login Consent" to On. Toggle "Require Explicit User Consent" to Yes. Note: The banner text is also entered; however, that is covered by NMGR-4X-000013.