TOSS must ignore IPv4 Internet Control Message Protocol (ICMP) redirect messages.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-253118TOSS-04-040770SV-253118r991589_ruleCCI-000366medium
Description
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.
STIGDate
Tri-Lab Operating System Stack (TOSS) 4 Security Technical Implementation Guide2025-05-08

Related Frameworks

4 paths across 3 frameworks
NIST 800-531 mapping
CM-6
1.00
  • DISA · 2 · disa_xccdf · related
  • DISA · 2025-01-23 · disa_cci_list · equivalent
NIST 800-1712 mappings
3.4.1
1.00
  • DISA · 2 · disa_xccdf · related
  • DISA · 2025-01-23 · disa_cci_list · equivalent
  • NIST · Rev 2 (Feb 2020, errata Jan 2021) · nist_800_171_app_d · equivalent
3.4.2
1.00
  • DISA · 2 · disa_xccdf · related
  • DISA · 2025-01-23 · disa_cci_list · equivalent
  • NIST · Rev 2 (Feb 2020, errata Jan 2021) · nist_800_171_app_d · equivalent
CCI1 mapping
CCI-000366
1.00
  • DISA · 2 · disa_xccdf · related

Details

Check Text (C-253118r991589_chk)

Verify TOSS ignores IPv4 ICMP redirect messages. Note: If IPv4 is disabled on the system, this requirement is Not Applicable. Check the value of the "accept_redirects" variables with the following command: $ sudo sysctl net.ipv4.conf.all.accept_redirects net.ipv4.conf.all.accept_redirects = 0 If the returned line does not have a value of "0", a line is not returned, or the line is commented out, this is a finding.

Fix Text (F-56521r825025_fix)

Configure TOSS to ignore IPv4 ICMP redirect messages with the following command: $ sudo sysctl -w net.ipv4.conf.all.accept_redirects=0 If "0" is not the system's default value then add or update the following line in the appropriate file under "/etc/sysctl.d": net.ipv4.conf.all.accept_redirects = 0