OpenControls Logo

STIG Viewer

STIGViewer Support

The Tanium application must allocate audit record storage capacity in accordance with organization-defined audit record storage requirements.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-254933TANS-AP-000860SV-254933r1067722_ruleCCI-001849medium
Description
To ensure applications have a sufficient storage capacity in which to write the audit logs, applications need to be able to allocate audit record storage capacity. The task of allocating audit record storage capacity is usually performed during initial installation of the application and is closely associated with the DBA and system administrator roles. The DBA or system administrator will usually coordinate the allocation of physical drive space with the application owner/installer and the application will prompt the installer to provide the capacity information, the physical location of the disk, or both.
STIGDate
Tanium 7.x Application on TanOS Security Technical Implementation Guide2025-02-11

Related Frameworks

1 mapping across 3 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-04Event Log Storage Capacity
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (14) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AU-12Audit Record Generation
1.00
AU-14(1)System Start-up
1.00
AU-3Content of Audit Records
1.00
AU-3(1)Additional Audit Information
1.00
AU-4Audit Log Storage Capacity
1.00
AU-4(1)Transfer to Alternate Storage
1.00
AU-5Response to Audit Logging Process Failures
1.00
AU-5(1)Storage Capacity Warning
1.00
AU-5(2)Real-time Alerts
1.00
AU-7Audit Record Reduction and Report Generation
1.00

+4 more (top 10 by confidence shown)

CCI1 mapping
CCI-001849
1.00

Details

Check Text (C-254933r1067722_chk)

1. Access the TanOS interactively. 2. Press "A" for "Appliance Configuration Menu," and then press "Enter". 3. Press "4" for "Syslog Configuration," and then press "Enter". 4. Press "1" for "Check current status," and then press "Enter". If the syslog status page states "No existing TanOS syslog forwarding configuration found" this is a finding. If the syslog status page states "Syslog forwarding configuration" and the SIEM administrator verifies SIEM is receiving the events correctly and generating notifications for low free disk space, this is not a finding.

Fix Text (F-58490r1067721_fix)

1. Access the TanOS interactively. 2. Press "A" for "Appliance Configuration Menu," and then press "Enter". 3. Press "4" for "Syslog Configuration," and then press "Enter". 4. Press "5" for "Configure syslog forwarding," and then press "Enter". 5. Enter the destination host (IP address or hostname) provided by the SIEM administrator, and then press "Enter". 6. Enter the destination port number and press "Enter". 7. If TLS is required for this syslog destination, enter "Yes", otherwise enter "No", and press "Enter". 8. Enter the destination protocol, "udp" or "tcp", and press "Enter". 9. Work with the SIEM administrator to validate events are being received, and to configure notifications for low free disk space.