OpenControls Logo

STIG Viewer

STIGViewer Support

The Tanium application must alert the ISSO and SA (at a minimum) in the event of an audit processing failure.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-254898TANS-AP-000260SV-254898r960912_ruleCCI-000139medium
Description
It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without this notification, the security personnel may be unaware of an impending failure of the audit capability and system operation may be adversely affected. Audit processing failures include software/hardware errors, failures in the audit capturing mechanisms, and audit storage capacity being reached or exceeded. This requirement applies to each audit data storage repository (i.e., distinct information system component where audit records are stored), the centralized audit storage capacity of organizations (i.e., all audit data storage repositories combined), or both.
STIGDate
Tanium 7.x Application on TanOS Security Technical Implementation Guide2025-02-11

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-05Response To Event Log Processing Failures
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (20) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-2(4)Automated Audit Actions
1.00
AU-10Non-repudiation
1.00
AU-12Audit Record Generation
1.00
AU-12(1)System-wide and Time-correlated Audit Trail
1.00
AU-14(1)System Start-up
1.00
AU-4(1)Transfer to Alternate Storage
1.00
AU-5Response to Audit Logging Process Failures
1.00
AU-5(1)Storage Capacity Warning
1.00
AU-5(2)Real-time Alerts
1.00
AU-6(4)Central Review and Analysis
1.00

+10 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.3.4
1.00
CCI1 mapping
CCI-000139
1.00

Details

Check Text (C-254898r960912_chk)

1. Using a web browser on a system that has connectivity to the Tanium Application, access the Tanium Application web user interface (UI) and log on with multi-factor authentication. 2. Click "Modules" on the top navigation banner. 3. Click "Connect". 4. Review the configured Connections under "Connections" section. Work with the SIEM administrator to determine if an alert is configured when audit data is no longer received as expected. If there is no alert configured, this is a finding.

Fix Text (F-58455r867593_fix)

1. Using a web browser on a system that has connectivity to the Tanium Application, access the Tanium Application web user interface (UI) and log on with multi-factor authentication. 2. Click "Modules" on the top navigation banner. 3. Click "Connect". 4. Expand the left menu. 5. Click "Connections". 6. Configure a Connection for the "Tanium Audit Source" source from the Tanium Application to a SIEM tool. Work with the SIEM administrator to configure an alert when no audit data is received from Tanium based on the defined schedule of connections.