OpenControls Logo

STIG Viewer

STIGViewer Support

Accounts for device management must be configured on the authentication server and not on Symantec ProxySG itself, except for the account of last resort.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-94683SYMP-NM-000160SV-104513r1_ruleCCI-000366medium
Description
Centralized management of authentication settings increases the security of remote and nonlocal access methods. This control is particularly important protection against the insider threat. With robust centralized management, audit records for administrator account access to the organization's network devices can be more readily analyzed for trends and anomalies. The alternative method of defining administrator accounts on each device exposes the device configuration to remote access authentication attacks and system administrators with multiple authenticators for each network device.
STIGDate
Symantec ProxySG NDM Security Technical Implementation Guide2019-12-20

Related Frameworks

2 mappings across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (9) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-01Configuration Management Program
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
MON-01Continuous Monitoring
1.00
MON-01.7File Integrity Monitoring (FIM)
1.00
CFG-02Secure Baseline Configurations
0.50
CFG-02.2Automated Central Management & Verification
0.50
CFG-02.7Approved Configuration Deviations
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (100) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-12Session Termination
1.00
AC-16(1)Dynamic Attribute Association
1.00
AC-17(1)Monitoring and Control
1.00
AC-2Account Management
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-24(1)Transmit Access Authorization Information
1.00
AC-25Reference Monitor
1.00

+90 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.4.1
1.00
3.4.2
1.00
CCI2 mappings
CCI-000366
1.00
CCI-000370
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
PR.PS-01
1.00
PR.DS-10
0.50
PR.PSPlatform Security
0.50
PR.PS-05
0.50

Who does this work

10 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-104513r1_chk)

Verify that the Symantec ProxySG uses a centrally administered AAA server (LDAP to Active Directory). 1. Log on to the Web Management Console. 2. Click Configuration >> Authentication >> LDAP. 3. Click through the "LDAP Realms", "LDAP DN", "LDAP Search & Groups", "LDAP Objectclasses", and "LDAP General" tabs and ensure that the settings are appropriate for your organization. If accounts for device management are not configured on the authentication server or are on the Symantec ProxySG itself, except for the account of last resort, this is a finding.

Fix Text (F-100801r1_fix)

In order to configure the ProxySG to use a centrally administered AAA server (LDAP to Active Directory): 1. Log on to the Web Management Console. 2. Click Configuration >> Authentication >> LDAP. 3. Click "New", provide a name for the realm. 4. Change the "Type of LDAP server" to be "Microsoft Active Directory". 5. Provide an IP address or FQDN for the "Primary Server host" and change the port to 636 for LDAP over TLS. 6. Change the "User attribute type" if your organization uses a different attribute than the sAMAccountName, click "OK". 7. Click on the "LDAP Servers" tab, select "Enable SSL", and confirm the other settings per your organization. 8. Click through the "LDAP DN", "LDAP Search & Groups", "LDAP Objectclasses", and "LDAP General" tabs and ensure that the settings are appropriate for your organization. 9. Click "Apply". 10. To test the configuration, click the "Test Configuration" button under "LDAP Servers", and provide a valid username and password. 11. Still within the "Configuration" tab, click on "Policy", then "Visual Policy Editor" and click "Launch". 12. Click "Policy" and choose "Add Admin Authentication Layer". 13. Give it a name and click "OK". 14. Right-click the "Action" cell and choose "Set". 15. With "AdminAuthenticate1" highlighted, click "Edit". 16. Choose the "Realm" that was created on step 3, and click "OK", click "OK" again. 17. Click "Policy" and choose "Add Admin Access Layer". 18. Give it a name and click "OK". 19. Right-click the "Source" field and click "Set". 20. If a "local realm" exists in the list, highlight it and click "Remove". 21. Click "New", and choose either "User" or "Group" depending on what you wish to accomplish. 22. Provide the user or group name, and ensure that the Authentication Realm from step 3 is selected, and populate the Group/User Base DN and "Full Name" fields as appropriate for your organization. 23. If you wish to restrict this user/group to specific management services, right-click the "Service" Field, and select "Set", click "New", click "Service Name" then choose the appropriate service name. Repeat for any other specific services you would like to grant access for. Then click "OK". 24. Right-click the "Action" cell, and either choose "read-only" or "read/write" access. 25. Click "File" and choose "Install Policy on SG Appliance".