OpenControls Logo

STIG Viewer

STIGViewer Support

Symantec ProxySG must implement load balancing to limit the effects of known and unknown types of denial-of-service (DoS) attacks.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-94319SYMP-AG-000530SV-104273r1_ruleCCI-002385medium
Description
If the network does not provide safeguards against DoS attacks, network resources will be unavailable to users. Load balancing provides service redundancy, which reduces the susceptibility of the ALG to many DoS attacks. The ALG must be configured to prevent or mitigate the impact on network availability and traffic flow of DoS attacks that have occurred or are ongoing. This requirement applies to the network traffic functionality of the device as it pertains to handling network traffic. Some types of attacks may be specialized to certain network technologies, functions, or services. For each technology, known and potential DoS attacks must be identified and solutions for each type implemented. For detailed information, see the ProxySG Administration Guide, Chapter 39: Configuring Failover.
STIGDate
Symantec ProxySG ALG Security Technical Implementation Guide2020-03-27

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (13) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-01Continuous Monitoring
1.00
MON-01.1Intrusion Detection & Prevention Systems (IDS & IPS)
1.00
MON-01.3Inbound & Outbound Communications Traffic
1.00
MON-01.4System Generated Alerts
1.00
MON-01.8Security Event Monitoring
1.00
NET-01Network Security Controls (NSC)
1.00
NET-02Layered Network Defenses
1.00
SEA-01Secure Engineering Principles
1.00
SEA-02Alignment With Enterprise Architecture
1.00
CAP-01Capacity & Performance Management
0.50

+3 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (36) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-10Concurrent Session Control
1.00
AC-17(9)Disconnect or Disable Access
1.00
AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00
AC-4Information Flow Enforcement
1.00
AC-6(9)Log Use of Privileged Functions
1.00
AU-12Audit Record Generation
1.00
AU-3Content of Audit Records
1.00
AU-5Response to Audit Logging Process Failures
1.00
CM-11(2)Software Installation with Privileged Status
1.00

+26 more (top 10 by confidence shown)

CCI1 mapping
CCI-002385
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-01
1.00
PR.IR-01
1.00
PR.IR-04
0.50

Who does this work

12 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-104273r1_chk)

Verify that redundancy has been configured on the ProxySG. 1. Log on to the Web Management Console. 2. Browse to Configuration >> Network >> Advanced. 3. Select the "Failover" tab and Verify that entries are present and that they are "enabled". If Symantec ProxySG does not implement load balancing to limit the effects of known and unknown types of DoS attacks, this is a finding.

Fix Text (F-100435r1_fix)

Configure redundancy on the ProxySG. 1. Log on to the Web Management Console. 2. Browse to Configuration >> Network >> Advanced. 3. Select the "Failover" tab and configure using the SSP requirements.