OpenControls Logo

STIG Viewer

STIGViewer Support

The Edge SWG must obtain its public key certificates from an appropriate certificate policy through an approved service provider.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-279273SYME-ND-000800SV-279273r1170704_ruleCCI-000366medium
Description
Before continuing, the site must follow the configuration steps in SYME-ND-000100. For user certificates, each organization obtains certificates from an approved, shared service provider, as required by OMB policy. For federal agencies operating a legacy public key infrastructure cross-certified with the Federal Bridge Certification Authority at medium assurance or higher, this certification authority will suffice. Satisfies: SRG-APP-000516-NDM-000344, SRG-APP-000910-NDM-000300
STIGDate
Symantec Edge SWG NDM Security Technical Implementation Guide2026-02-25

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (8) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-01Configuration Management Program
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
MON-01Continuous Monitoring
1.00
MON-01.7File Integrity Monitoring (FIM)
1.00
CFG-02Secure Baseline Configurations
0.50
CFG-02.7Approved Configuration Deviations
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (100) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-12Session Termination
1.00
AC-16(1)Dynamic Attribute Association
1.00
AC-17(1)Monitoring and Control
1.00
AC-2Account Management
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-24(1)Transmit Access Authorization Information
1.00
AC-25Reference Monitor
1.00

+90 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.4.1
1.00
3.4.2
1.00
CCI1 mapping
CCI-000366
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
PR.PS-01
1.00
PR.DS-10
0.50
PR.PSPlatform Security
0.50
PR.PS-05
0.50

Who does this work

10 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-279273r1170704_chk)

1. Log in to the Edge SWG SSH CLI. 2. Enter "enable" and "configure terminal". 3. Issue the command "ssl", then issue the command "view keyring". 4. Find the keyrings that state: "FIPS compliant: yes". 1. Log in to the Edge SWG Web UI. 2. Navigate to the Configuration tab. 3. Click the SSL, and then keyrings section. If the keyring in use was not FIPS compliant from step #3 above, this is a finding. Click the keyring in use. If the certificate in the keyring was not issued by a DOD certificate authority this is a finding.

Fix Text (F-83728r1170579_fix)

1. Log in to the Edge SWG SSH CLI. 2. Enter "enable" and "configure terminal". 3. Enter "ssl". 4. Enter "create fips keyring show fips-keyring 2048". The "fips-keyring" name can be changed to whatever the site wants to use. 5. Enter "create signing-request fips-keyring". 6. Enter "view signing-request fips-keyring". Copy the signing request PEM data and provide it to the CA for certificate issuance. 7. Once the DOD CA issues/signs the certificate for the keyring type "inline certificate fips-keyring ~", paste the raw certificate data into a text editor, then press enter. Ensure the "~" is present at the end of the inserted text. 8. For each LDAP server, CA certificate, and CAC authentication CA certificate, issue the following command: "inline fips ca-certificate DODCA1 ~". Ensure the ~ is entered at the end of the certificate data paste. Note: DODCA1 is used as an example. 9. Repeat the "inline fips ca-certificate" command for all CA certificates in use for LDAPS and CAC authentication. 10. Create a new FIPS-enabled CCL by entering: "create fips ccl fips-ccl". The fips-ccl name can be changed to whatever the site wants to use. 11. Enter "edit ccl fips-ccl". 12. Enter "add", then enter all the CAs added in all previous steps. 13. Create an SSL device profile by entering: "create fips ssl-device-profile fips-profile fips-keyring". The "fips-profile" name can be changed to whatever the site wants to use.