STIGViewer Support

The Edge SWG must terminate all network connections associated with a device management session at the end of the session, or the session must be terminated after five minutes of inactivity except to fulfill documented and validated mission requirements.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-279264SYME-ND-000660SV-279264r1172802_ruleCCI-001133high
Description
Terminating an idle session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended. In addition, quickly terminating an idle session will also free up resources committed by the managed network element. Terminating network connections associated with communications sessions includes, for example, deallocating associated TCP/IP address/port pairs at the operating system level, or deallocating networking assignments at the application level if multiple application sessions are using a single, operating system-level network connection. This does not mean that the device terminates all sessions or network access; it only ends the inactive session and releases the resources associated with that session.
STIGDate
Symantec Edge SWG NDM Security Technical Implementation Guide2026-02-25

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

NET-07Network Connection Termination
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (24) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-11Device Lock
1.00
AC-11(1)Pattern-hiding Displays
1.00
AC-12Session Termination
1.00
AC-12(2)Termination Message
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(2)Automated Temporary and Emergency Account Management
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-7Unsuccessful Logon Attempts
1.00

+14 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.13.9
1.00
CCI1 mapping

Details

Check Text (C-279264r1172802_chk)

1. Log in to the Edge SWG SSH CLI. 2. Enter "show security". Under "Account", if "CLI session timeout" does not say "5 minutes", this is a finding. Under "Account", if "Web interface session timeout" does not say "5 minutes", this is a finding.

Fix Text (F-83719r1170555_fix)

1. Log in to the Edge SWG SSH CLI. 2. Enter "enable" and "configure terminal". 3. Enter "security management web-timeout 5". 4. Enter "security management cli-timeout 5".