OpenControls Logo

STIG Viewer

STIGViewer Support

The Edge SWG must be configured to send log data to at least one central log server for the purpose of forwarding alerts to the administrators and the information system security officer (ISSO).

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-279252SYME-ND-000410SV-279252r1170685_ruleCCI-001403high
Description
Before continuing, the site must follow the configuration steps under SYME-ND-000800. The aggregation of log data kept on a syslog server can be used to detect attacks and trigger an alert to the appropriate security personnel. The stored log data can be used to detect weaknesses in security that enable the network IA team to find and address these weaknesses before breaches can occur. Reviewing these logs, whether before or after a security breach, are important in showing whether someone is an internal employee or an outside threat. Satisfies: SRG-APP-000027-NDM-000209, SRG-APP-000026-NDM-000208, SRG-APP-000028-NDM-000210, SRG-APP-000029-NDM-000211, SRG-APP-000091-NDM-000223, SRG-APP-000095-NDM-000225, SRG-APP-000381-NDM-000305, SRG-APP-000515-NDM-000325, SRG-APP-000516-NDM-000350, SRG-APP-000795-NDM-000130
STIGDate
Symantec Edge SWG NDM Security Technical Implementation Guide2026-02-25

Related Frameworks

1 mapping across 3 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

IAC-15.4Automated Audit Actions
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (59) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-16Security and Privacy Attributes
1.00
AC-17(1)Monitoring and Control
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(10)Shared and Group Account Credential Change
1.00
AC-2(11)Usage Conditions
1.00
AC-2(2)Automated Temporary and Emergency Account Management
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00
AC-3(3)Mandatory Access Control
1.00

+49 more (top 10 by confidence shown)

CCI1 mapping
CCI-001403
1.00

Details

Check Text (C-279252r1170685_chk)

1. In the Edge SWG Web UI, navigate to the Administration tab. 2. Select the "Logging" and "Event Logging" areas. 3. Scroll down to the "Syslog Loghosts". If a syslog server hostname/IP address is not configured, this is a finding. If the syslog loghost is configured but is not using the TLS protocol, this is a finding. 4. Scroll down to the "Default Notification" section, under "Syslog". If it is not "Enabled" and set to "all messages", this is a finding.

Fix Text (F-83707r1170684_fix)

1. In the Edge SWG Web UI, navigate to the Administration tab. 2. Select the "Logging" and "Event Logging" areas. Note: This section sets the "SSL Keyring", which is needed for the "SSL Device Profile". Once the SSL Device Profile has been created properly, scroll down to the "Syslog Loghosts". 3. Click "Add loghost". 4. Click "TLS". 5. Enter the fully qualified domain name of the log server. 6. Enter the port, by default TLS syslog is 6514. 7. Under "SSL Device Profile" select the profile associated with the DOD PKI certificate and key created previously. 8. Click "Add". 9. Scroll down to "Default Notifications", ensure "Syslog" is set to "Enabled", and the "Level" is "All Messages". 10. On the syslog server, ensure the server is receiving the messages and troubleshoot any TLS-related communications issues.