OpenControls Logo

STIG Viewer

STIGViewer Support

SLEM 5 audit system must take appropriate action when the audit storage volume is full.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-261415SLEM-05-653035SV-261415r1038966_ruleCCI-000140medium
Description
It is critical that when SLEM 5 is at risk of failing to process audit logs as required, it takes action to mitigate the failure. Audit processing failures include software/hardware errors, failures in the audit capturing mechanisms, and audit storage capacity being reached or exceeded. Responses to audit failure depend on the nature of the failure mode. When availability is an overriding concern, other approved actions in response to an audit failure are as follows: 1) If the failure was caused by the lack of audit record storage capacity, SLEM 5 must continue generating audit records if possible (automatically restarting the audit service if necessary), overwriting the oldest audit records in a first-in-first-out manner. 2) If audit records are sent to a centralized collection server and communication with this server is lost or the server fails, SLEM 5 must queue audit records locally until communication is restored or until the audit records are retrieved manually. Upon restoration of the connection to the centralized collection server, action should be taken to synchronize the local audit data with the collection server.
STIGDate
SUSE Linux Enterprise Micro (SLEM) 5 Security Technical Implementation Guide2026-02-10

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-05Response To Event Log Processing Failures
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (24) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00
AC-6(9)Log Use of Privileged Functions
1.00
AU-10Non-repudiation
1.00
AU-12Audit Record Generation
1.00
AU-14(1)System Start-up
1.00
AU-3Content of Audit Records
1.00
AU-3(1)Additional Audit Information
1.00
AU-3(2)Centralized Management of Planned Audit Record Content
1.00
AU-4Audit Log Storage Capacity
1.00

+14 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.3.4
1.00
CCI1 mapping
CCI-000140
1.00

Details

Check Text (C-261415r1038966_chk)

Verify SLEM 5 takes the appropriate action when the audit storage volume is full using the following command: > sudo grep disk_full_action /etc/audit/auditd.conf disk_full_action = HALT If "disk_full_action" is not set to "HALT", "SYSLOG", or "SINGLE", is commented out, or is missing, this is a finding.

Fix Text (F-65052r996656_fix)

Configure SLEM 5 to shut down by default upon audit failure. Add or modify the following line in the "/etc/audit/auditd.conf " file: disk_full_action = HALT Note: If system availability has been determined to be more important, and this decision is documented with the information system security officer (ISSO), configure SLEM 5 to notify system administration staff and ISSO staff in the event of an audit processing failure by setting the "disk_full_action" to "SYSLOG" or "SINGLE".