OpenControls Logo

STIG Viewer

STIGViewer Support

The limitpriv zone option must be set to the vendor default or less permissive.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-216475SOL-11.1-100020SV-216475r959010_ruleCCI-000366low
Description
Solaris zones can be assigned privileges generally reserved for the global zone using the "limitpriv" zone option. Any privilege assignments in excess of the vendor defaults may provide the ability for a non-global zone to compromise the global zone.
STIGDate
Solaris 11 SPARC Security Technical Implementation Guide2026-05-13

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (8) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-01Configuration Management Program
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
MON-01Continuous Monitoring
1.00
MON-01.7File Integrity Monitoring (FIM)
1.00
CFG-02Secure Baseline Configurations
0.50
CFG-02.7Approved Configuration Deviations
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (100) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-12Session Termination
1.00
AC-16(1)Dynamic Attribute Association
1.00
AC-17(1)Monitoring and Control
1.00
AC-2Account Management
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-24(1)Transmit Access Authorization Information
1.00
AC-25Reference Monitor
1.00

+90 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.4.1
1.00
3.4.2
1.00
CCI1 mapping
CCI-000366
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
PR.PS-01
1.00
PR.DS-10
0.50
PR.PSPlatform Security
0.50
PR.PS-05
0.50

Who does this work

10 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-216475r959010_chk)

This check applies to the global zone only. Determine the zone that you are currently securing. # zonename If the command output is "global", this check applies. List the non-global zones on the system. # zoneadm list -vi | grep -v global From the output list of non-global zones found, determine if any are Kernel zones. # zoneadm list -cv | grep [zonename] | grep solaris-kz Exclude any Kernel zones found from the list of local zones. List the configuration for each zone. # zonecfg -z [zonename] info |grep limitpriv If the output of this command has a setting for limitpriv and it is not: limitpriv: default this is a finding.

Fix Text (F-17709r371508_fix)

This check applies to the global zone only. Determine the zone that you are currently securing. # zonename If the command output is "global", this check applies. The Zone Security profile is required: Change the "limitpriv" setting to default. # pfexec zonecfg -z [zone] set limitpriv=default