OpenControls Logo

STIG Viewer

STIGViewer Support

The SEL-2740S must authenticate Network Time Protocol sources using authentication that is cryptographically based.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-94589SELS-ND-001025SV-104419r2_ruleCCI-001967medium
Description
If Network Time Protocol is not authenticated, an attacker can introduce a rogue NTP server. This rogue server can then be used to send incorrect time information to network devices, which will make log timestamps inaccurate and affect scheduled actions. NTP authentication is used to prevent this tampering by authenticating the time source.
STIGDate
SEL-2740S NDM Security Technical Implementation Guide2019-05-06

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

IAC-04Identification & Authentication for Devices
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (49) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-17(10)Authenticate Remote Commands
1.00
AC-17(2)Protection of Confidentiality and Integrity Using Encryption
1.00
AC-18(1)Authentication and Encryption
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(2)Automated Temporary and Emergency Account Management
1.00
AC-2(3)Disable Accounts
1.00
AC-4(17)Domain Authentication
1.00
AC-7Unsuccessful Logon Attempts
1.00
AU-8Time Stamps
1.00

+39 more (top 10 by confidence shown)

CCI1 mapping
CCI-001967
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 4 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

PR.AA-01
0.50
PR.AA-03
0.50
PR.AA-05
0.50

Details

Check Text (C-104419r2_chk)

Verify NTP packets only traverse on the private network by traffic engineering both the physical path and redundant path between switch and NTP server. 1. Login to the OTSDN Controller with permission Level 3 rights into parent. 2. Go to the Configuration Objects settings page. 3. Review the NTP Server IP addresses in the settings fields. If the IP addresses are not within the private network, this is a finding.

Fix Text (F-100707r1_fix)

Deploy the NTP server within the private network. Provision both the physical path and redundant path between the switch and NTP server to ensure NTP packets only traverse the private network. Use multilayer packet inspection at each hop of the switches to whitelist only the intended NTP clients and server can communicate to each other.