OpenControls Logo

STIG Viewer

STIGViewer Support

RHEL 10 must set the umask value to "077" for all local interactive user accounts.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-281079RHEL-10-400310SV-281079r1165592_ruleCCI-000213medium
Description
The umask controls the default access mode assigned to newly created files. A umask of "077" limits new files to mode 600 or less permissive. Although umask can be represented as a four-digit number, the first digit representing special access modes is typically ignored or required to be "0". This requirement applies to the globally configured system defaults and the local interactive user defaults for each account on the system.
STIGDate
Red Hat Enterprise Linux 10 Security Technical Implementation Guide2026-03-11

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (20) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-02Secure Baseline Configurations
1.00
CRY-01Use of Cryptographic Controls
1.00
DCH-01Data Protection
1.00
HRS-02Position Categorization
1.00
HRS-11Separation of Duties (SoD)
1.00
IAC-01Identity & Access Management (IAM)
1.00
IAC-01.2Authenticate, Authorize and Audit (AAA)
1.00
IAC-02Identification & Authentication for Organizational Users
1.00
IAC-03Identification & Authentication for Non-Organizational Users
1.00
IAC-04Identification & Authentication for Devices
1.00

+10 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (93) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-10Concurrent Session Control
1.00
AC-16Security and Privacy Attributes
1.00
AC-17(1)Monitoring and Control
1.00
AC-17(10)Authenticate Remote Commands
1.00
AC-17(2)Protection of Confidentiality and Integrity Using Encryption
1.00
AC-18(1)Authentication and Encryption
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(10)Shared and Group Account Credential Change
1.00
AC-2(11)Usage Conditions
1.00
AC-2(2)Automated Temporary and Emergency Account Management
1.00

+83 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.1.1
1.00
3.1.2
1.00
CCI1 mapping
CCI-000213
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

PR.AA-05
1.00
PR.DS-10
1.00
PR.IR-01
1.00

Who does this work

17 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-281079r1165592_chk)

Verify RHEL 10 sets the default umask for all local interactive users to "077". Identify the locations of all local interactive user home directories by looking at the "/etc/passwd" file. Check all local interactive user initialization files for interactive users with the following command: Note: The example is for a system that is configured to create users' home directories in the "/home" directory. $ sudo find /home -maxdepth 2 -type f -name ".[^.]*" -exec grep -iH -d skip --exclude=.bash_history umask {} \; /home/disauser/.bash_history:grep -i umask /etc/bashrc /etc/csh.cshrc /etc/profile /home/disauser/.bash_history:grep -i umask /etc/login.defs If any local interactive user initialization files are found to have a umask statement that sets a value less restrictive than "077", this is a finding.

Fix Text (F-85545r1165591_fix)

Configure RHEL 10 to set the umask value for all local interactive user accounts to "077". Remove the umask statement from all local interactive users' initialization files. If the account is for an application, the requirement for a umask less restrictive than "077" can be documented with the information system security officer. However, the user agreement for access to the account must specify that the local interactive user must log in to their account first and then switch the user to the application account with the correct option to gain the account's environment variables.