RHEL 10 must prevent Internet Protocol version 6 (IPv6) Internet Control Message Protocol (ICMP) redirect messages from being accepted.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
| V-281359 | RHEL-10-800270 | SV-281359r1167227_rule | CCI-002385 | medium |
| Description | ||||
| ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack. Satisfies: SRG-OS-000420-GPOS-00186, SRG-OS-000142-GPOS-00090 | ||||
| STIG | Date | |||
| Red Hat Enterprise Linux 10 Security Technical Implementation Guide | 2026-03-11 | |||
Details
Check Text (C-281359r1167227_chk)
Note: If IPv6 is disabled on the system, this requirement is not applicable.
Verify RHEL 10 prevents IPv6 ICMP redirect messages from being accepted.
Check the value of the "net.ipv6.conf.default.accept_redirects" variables with the following command:
$ sudo sysctl net.ipv6.conf.default.accept_redirects
net.ipv6.conf.default.accept_redirects = 0
If "net.ipv6.conf.default.accept_redirects" is not set to "0" or is missing, this is a finding.
Fix Text (F-85825r1167226_fix)
Configure RHEL 10 to prevent IPv6 ICMP redirect messages from being accepted.
Create a configuration file if it does not already exist:
$ sudo vi /etc/sysctl.d/ipv6_accept_redirects.conf
Add the following line to the file:
net.ipv6.conf.default.accept_redirects = 0
Reload settings from all system configuration files with the following command:
$ sudo sysctl --system