RHEL 10 must not send Internet Control Message Protocol (ICMP) redirects.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
| V-281351 | RHEL-10-800190 | SV-281351r1184698_rule | CCI-002385 | medium |
| Description | ||||
| ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table, possibly revealing portions of the network topology. The ability to send ICMP redirects is only appropriate for systems acting as routers. Satisfies: SRG-OS-000420-GPOS-00186, SRG-OS-000142-GPOS-00082 | ||||
| STIG | Date | |||
| Red Hat Enterprise Linux 10 Security Technical Implementation Guide | 2026-03-11 | |||
Details
Check Text (C-281351r1184698_chk)
Verify RHEL 10 does not send IPv4 ICMP redirect messages.
Check the value of the "net.ipv4.conf.all.send_redirects" variables with the following command:
$ sudo sysctl net.ipv4.conf.all.send_redirects
net.ipv4.conf.all.send_redirects = 0
If "net.ipv4.conf.all.send_redirects" is not set to "0" and is not documented with the information system security officer as an operational requirement or is missing, this is a finding.
Fix Text (F-85817r1184697_fix)
Configure RHEL 10 to not send IPv4 ICMP redirect messages.
Create a configuration file if it does not already exist:
$ sudo vi /etc/sysctl.d/ipv4_send_redirects.conf
Add the following line to the file:
net.ipv4.conf.all.send_redirects = 0
Reload settings from all system configuration files with the following command:
$ sudo sysctl --system