RHEL 10 must not forward Internet Protocol version 4 (IPv4) source-routed packets by default.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
| V-281347 | RHEL-10-800150 | SV-281347r1167191_rule | CCI-002385 | medium |
| Description | ||||
| Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It must be disabled unless it is absolutely required, such as when IPv4 forwarding is enabled and the system is legitimately functioning as a router. Satisfies: SRG-OS-000420-GPOS-00186, SRG-OS-000142-GPOS-00078 | ||||
| STIG | Date | |||
| Red Hat Enterprise Linux 10 Security Technical Implementation Guide | 2026-03-11 | |||
Details
Check Text (C-281347r1167191_chk)
Verify RHEL 10 does not accept IPv4 source-routed packets by default.
Check the value of the "net.ipv4.conf.default.accept_source_route" variable with the following command:
$ sudo sysctl net.ipv4.conf.default.accept_source_route
net.ipv4.conf.default.accept_source_route = 0
If "net.ipv4.conf.default.accept_source_route" is not set to "0" or is missing, this is a finding.
Fix Text (F-85813r1167190_fix)
Configure RHEL 10 to not forward IPv4 source-routed packets by default.
Create a configuration file if it does not already exist:
$ sudo vi /etc/sysctl.d/99-ipv4_accept_source_route.conf
Add the following line to the file:
net.ipv4.conf.default.accept_source_route = 0
Reload settings from all system configuration files with the following command:
$ sudo sysctl --system