RHEL 10 must be configured to disable the Controller Area Network (CAN) kernel module.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
| V-281312 | RHEL-10-701100 | SV-281312r1167086_rule | CCI-000381 | medium |
| Description | ||||
| Disabling CAN protects the system against exploitation of any flaws in its implementation. | ||||
| STIG | Date | |||
| Red Hat Enterprise Linux 10 Security Technical Implementation Guide | 2026-03-11 | |||
Details
Check Text (C-281312r1167086_chk)
Verify RHEL 10 disables the ability to load the CAN kernel module with the following command:
$ sudo grep -rs can /etc/modprobe.conf /etc/modprobe.d/* | grep -v '#'
/etc/modprobe.d/can.conf:install can /bin/false
/etc/modprobe.d/can.conf:blacklist can
If the command does not return any output, or the lines are commented out, and use of CAN is not documented with the information system security officer as an operational requirement, this is a finding.
Fix Text (F-85778r1167085_fix)
Configure RHEL 10 to disable the ability to load the CAN kernel module.
Create a drop-in if it does not already exist:
$ sudo vi /etc/modprobe.d/can.conf
Add the following lines to the file:
install can /bin/false
blacklist can