OpenControls Logo

STIG Viewer

STIGViewer Support

The Palo Alto Networks security platform that stores secret or private keys must use FIPS-approved key management technology and processes in the production and control of private/secret cryptographic keys.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-228834PANW-AG-000017SV-228834r557387_ruleCCI-000068medium
Description
Private key data is used to prove that the entity presenting a public key certificate is the certificate's rightful owner. Compromise of private key data allows an adversary to impersonate the key holder. Private key data associated with software certificates is required to be generated and protected in at least a FIPS 140-2 Level 1 validated cryptographic module.
STIGDate
Palo Alto Networks ALG Security Technical Implementation Guide2025-03-12

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

NET-14.2Protection of Confidentiality / Integrity Using Encryption
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (33) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-17(1)Monitoring and Control
1.00
AC-17(2)Protection of Confidentiality and Integrity Using Encryption
1.00
AC-3Access Enforcement
1.00
CM-6Configuration Settings
1.00
CM-6(1)Automated Management, Application, and Verification
1.00
CM-7Least Functionality
1.00
CM-7(1)Periodic Review
1.00
IA-2(8)Access to Accounts — Replay Resistant
1.00
IA-2(9)Network Access to Non-privileged Accounts — Replay Resistant
1.00
IA-3Device Identification and Authentication
1.00

+23 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.1.13
1.00
CCI1 mapping
CCI-000068
1.00

Details

Check Text (C-228834r557387_chk)

Use the command line interface to determine if the device is operating in FIPS mode. If fips-mode or fips-cc is set to "off", this is a finding.

Fix Text (F-31046r513798_fix)

To configure the Palo Alto Networks security platform to operate in FIPS mode: Power off the device by unplugging it from the electrical outlet. Connect a console cable from the console port to a computer serial port, and use a terminal program to connect to the Palo Alto Networks device. The serial parameters are 9600 baud, 8 data bits, no parity, and 1 stop bit. A USB to serial adapter will be necessary if the computer does not have a serial port. During the boot sequence, this message will appear: "Autoboot to default partition in 5 seconds". Enter "maint" to boot to "maint" partition. Enter "maint" to enter maintenance mode. Press "Enter", and the "Maintenance Recovery tool" menu will appear. Select "Set FIPS Mode" (or fips-cc for later versions) from the menu; once the device has finished rebooting, it will be in FIPS mode. Note: This will remove all installed licenses and disable the serial port.