OL 9 must not enable IPv4 packet forwarding unless the system is a router.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-271872OL09-00-006028SV-271872r1092328_ruleCCI-000366medium
Description
Routing protocol daemons are typically used on routers to exchange network topology information with other routers. If this capability is used when not required, system network information may be unnecessarily transmitted across the network.
STIGDate
Oracle Linux 9 Security Technical Implementation Guide2025-05-08

Related Frameworks

4 paths across 3 frameworks
NIST 800-531 mapping
CM-6
1.00
  • DISA · 1 · disa_xccdf · related
  • DISA · 2025-01-23 · disa_cci_list · equivalent
NIST 800-1712 mappings
3.4.1
1.00
  • DISA · 1 · disa_xccdf · related
  • DISA · 2025-01-23 · disa_cci_list · equivalent
  • NIST · Rev 2 (Feb 2020, errata Jan 2021) · nist_800_171_app_d · equivalent
3.4.2
1.00
  • DISA · 1 · disa_xccdf · related
  • DISA · 2025-01-23 · disa_cci_list · equivalent
  • NIST · Rev 2 (Feb 2020, errata Jan 2021) · nist_800_171_app_d · equivalent
CCI1 mapping
CCI-000366
1.00
  • DISA · 1 · disa_xccdf · related

Details

Check Text (C-271872r1092328_chk)

Verify that OL 9 is not performing IPv4 packet forwarding, unless the system is a router. Check that IPv4 forwarding is disabled using the following command: $ sysctl net.ipv4.conf.all.forwarding net.ipv4.conf.all.forwarding = 0 If the IPv4 forwarding value is not "0" and is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.

Fix Text (F-75829r1092327_fix)

Configure OL 9 to not allow IPv4 packet forwarding unless the system is a router. Add or edit the following line in a single system configuration file in the "/etc/sysctl.d/" directory: net.ipv4.conf.all.forwarding = 0 Load settings from all system configuration files with the following command: $ sudo sysctl --system