OpenControls Logo

STIG Viewer

STIGViewer Support

The Nokia layer 2 switch must have Dynamic Address Resolution Protocol (ARP) Inspection (DAI) enabled on all user virtual local area networks (VLANs).

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-283685NOKI-L2-000130SV-283685r1204130_ruleCCI-002385medium
Description
DAI intercepts ARP requests and verifies that each of these packets has a valid IP-to-MAC address binding before updating the local ARP cache and forwarding the packet to the appropriate destination. Invalid ARP packets are dropped and logged. DAI determines the validity of an ARP packet based on valid IP-to-MAC address bindings stored in the Dynamic Host Configuration Protocol (DHCP) snooping binding database. If the ARP packet is received on a trusted interface, the switch forwards the packet without any checks. On untrusted interfaces, the switch forwards the packet only if it is valid.
STIGDate
Nokia Service Router OS 25.x Layer 2 Switch Security Technical Implementation Guide2026-06-15

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (13) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-01Continuous Monitoring
1.00
MON-01.1Intrusion Detection & Prevention Systems (IDS & IPS)
1.00
MON-01.3Inbound & Outbound Communications Traffic
1.00
MON-01.4System Generated Alerts
1.00
MON-01.8Security Event Monitoring
1.00
NET-01Network Security Controls (NSC)
1.00
NET-02Layered Network Defenses
1.00
SEA-01Secure Engineering Principles
1.00
SEA-02Alignment With Enterprise Architecture
1.00
CAP-01Capacity & Performance Management
0.50

+3 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (36) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-10Concurrent Session Control
1.00
AC-17(9)Disconnect or Disable Access
1.00
AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00
AC-4Information Flow Enforcement
1.00
AC-6(9)Log Use of Privileged Functions
1.00
AU-12Audit Record Generation
1.00
AU-3Content of Audit Records
1.00
AU-5Response to Audit Logging Process Failures
1.00
CM-11(2)Software Installation with Privileged Status
1.00

+26 more (top 10 by confidence shown)

CCI1 mapping
CCI-002385
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-01
1.00
PR.IR-01
1.00
PR.IR-04
0.50

Who does this work

12 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-283685r1204130_chk)

Review the virtual private local area network service (VPLS) configuration and verify an equivalent command for the DAI feature is enabled on all user VLANs. Verify both "DHCP snooping" and "lease populate" options under DHCP result for each service access point (SAP) within a VPLS service: -show service id 10 sap 1/1/c3/10 detail | match "Anti Spoofing" Anti Spoofing : Ip-Mac Dynamic Hosts : Enabled - show service id 10 sap 1/1/c3/10 detail | match "ARP Reply Agent" ARP Reply Agent : Enabled Host Conn Verify : Disabled Using the same command, verify "Anti Spoofing" is enabled with type IP-MAC, and "ARP Reply Agent" is also enabled. If these are not enabled on all user VLANs, this is a finding.

Fix Text (F-88155r1204129_fix)

The system evaluates ARP replies and requests received on a SAP with arp-reply-agent enabled against the anti-spoof filter entries associated with the ingress SAP. ARPs from unknown hosts on the SAP are discarded when anti-spoof filtering is enabled. Configure the Nokia router VPLS service to enable DHCP snooping at all points where DHCP messages requiring snooping enter the VPLS service: - configure service vpls <service id> sap <sap id> dhcp snoop Populate the DHCP lease state information extracted from snooped DHCP ACK messages. If the optional number "lease state table entries allowed" is omitted, only a single entry is allowed. Once the maximum number of entries has been reached, subsequent lease state entries are not allowed, and DHCP ACK messages are discarded. - configure service vpls <service id> sap <sap id> dhcp lease-populate <number of DHCP leases allowed> Enable anti-spoof filtering for untrusted VPLS service access points. Anti-spoof type can be ip, ip-mac, or mac. When type "ip" is used, only the source IP address is used in its lookup. The "ip-mac" type uses both IP address and the source MAC address in its lookup, while the "mac" type uses only the source MAC address in its lookup. If an entry does not match the ingress packet, the packet is silently discarded while incrementing the SAP discard counter. - configure service vpls <service id> sap <sap id> anti-spoof <anti-spoof type> Enable arp-reply-agent: - configure service vpls sap <sap id> arp-reply-agent