OpenControls Logo

STIG Viewer

STIGViewer Support

ONTAP must be configured to create a session lock after 15 minutes.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-246923NAOT-AC-000002SV-246923r1207671_ruleCCI-000057medium
Description
A session lock is a temporary network device or administrator-initiated action taken when the administrator stops work but does not log out of the network device. Rather than relying on the user to manually lock their management session prior to vacating the vicinity, network devices need to be able to identify when a management session has idled and take action to initiate the session lock. Once invoked, the session lock must remain in place until the administrator re-authenticates. No other system activity aside from re-authentication must unlock the management session. Note that CCI-001133 requires that administrative network sessions be disconnected after 10 minutes of idle time. This requirement may only apply to local administrative sessions.
STIGDate
NetApp ONTAP DSC 9.x Security Technical Implementation Guide2026-05-23

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

IAC-24Session Lock
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (18) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-11Device Lock
1.00
AC-11(1)Pattern-hiding Displays
1.00
AC-12Session Termination
1.00
AC-12(2)Termination Message
1.00
AU-10Non-repudiation
1.00
CM-7Least Functionality
1.00
IA-11Re-authentication
1.00
IA-2Identification and Authentication (Organizational Users)
1.00
IA-2(1)Multi-factor Authentication to Privileged Accounts
1.00
IA-2(12)Acceptance of PIV Credentials
1.00

+8 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.1.10
1.00
CCI1 mapping
CCI-000057
1.00

Details

Check Text (C-246923r1207671_chk)

Use "system timeout show" to check the current CLI timeout. If the system timeout is not set to 15 minute(s) or less, this is a finding.

Fix Text (F-50309r769100_fix)

Configure the CLI timeout value to 15 minutes with the command, "system timeout modify -timeout 15".