OpenControls Logo

STIG Viewer

STIGViewer Support

The Exchange Internet Receive connector connections count must be set to default.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-221230EX16-ED-000310SV-221230r961155_ruleCCI-001095low
Description
Email system availability depends in part on best practice strategies for setting tuning configurations. This configuration controls the maximum number of simultaneous inbound connections allowed to the SMTP server. By default, the number of simultaneous inbound connections is 5000. If a limit is set too low, the connections pool may be filled. If attackers perceive the limit is too low, they could deny service to the Simple Mail Transfer Protocol (SMTP) server by using a connection count that exceeds the limit set. By setting the default configuration to 5000, attackers would need many more connections to cause denial of service.
STIGDate
Microsoft Exchange 2016 Edge Transport Server Security Technical Implementation Guide2024-12-06

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CAP-02Resource Priority
0.50
CAP-03Capacity Planning
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (13) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-17(10)Authenticate Remote Commands
1.00
AC-17(9)Disconnect or Disable Access
1.00
AC-3Access Enforcement
1.00
AC-4Information Flow Enforcement
1.00
AU-3Content of Audit Records
1.00
CM-6Configuration Settings
1.00
CM-7Least Functionality
1.00
CM-7(2)Prevent Program Execution
1.00
SC-47Alternate Communications Paths
1.00
SC-5Denial-of-service Protection
1.00

+3 more (top 10 by confidence shown)

CCI1 mapping
CCI-001095
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 4 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

PR.IR-04
0.50

Details

Check Text (C-221230r961155_chk)

Review the Email Domain Security Plan (EDSP). Determine the Maximum Inbound connections value. Open the Exchange Management Shell and enter the following command: Get-ReceiveConnector | Select Name, Identity, MaxInboundConnection Identify Internet-facing connectors. For each receive connector, if the value of "MaxInboundConnection" is not set to "5000", this is a finding. or If "MaxInboundConnection" is set to a value other than "5000" or is set to unlimited and has signoff and risk acceptance in the EDSP, this is not a finding.

Fix Text (F-22934r411817_fix)

Update the EDSP to reflect the Maximum Inbound connections value. Open the Exchange Management Shell and enter the following command: Set-ReceiveConnector -Identity <'IdentityName'> -MaxInboundConnection 5000 Note: The <IdentityName> value must be in single quotes. or The value as identified by the EDSP that has obtained a signoff with risk acceptance. Repeat the procedure for each receive connector.