OpenControls Logo

STIG Viewer

STIGViewer Support

Microsoft Defender AV must be configured to check in real time with MAPS before content is run or accessed.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-213433WNDF-AV-000009SV-213433r1192798_ruleCCI-002624medium
Description
This feature ensures the device checks in real time with the Microsoft Active Protection Service (MAPS) before allowing certain content to be run or accessed. If this feature is disabled, the check will not occur, which will lower the protection state of the device. Enabled - The Block at First Sight setting is turned on. Disabled - The Block at First Sight setting is turned off. This feature requires these Group Policy settings to be set as follows: MAPS >> The "Join Microsoft MAPS" must be enabled or the "Block at First Sight" feature will not function. MAPS >> The "Send file samples when further analysis is required" should be set to 1 (Send safe samples) or 3 (Send all samples). Setting to 0 (Always Prompt) will lower the protection state of the device. Setting to 2 (Never send) means the "Block at First Sight" feature will not function. Real-time Protection >> The "Scan all downloaded files and attachments" policy must be enabled or the "Block at First Sight" feature will not function. Real-time Protection >> Do not enable the "Turn off real-time protection" policy or the "Block at First Sight" feature will not function.
STIGDate
Microsoft Defender Antivirus Security Technical Implementation Guide2026-05-08

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (15) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-02Secure Baseline Configurations
1.00
CRY-01Use of Cryptographic Controls
1.00
CRY-01.1Alternate Physical Protection
1.00
CRY-03Transmission Confidentiality
1.00
CRY-04Transmission Integrity
1.00
CRY-05Encrypting Data At Rest
1.00
DCH-01Data Protection
1.00
IAC-21Least Privilege
1.00
END-04Malicious Code Protection (Anti-Malware)
0.50
END-04.1Automatic Antimalware Signature Updates
0.50

+5 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

SI-3Malicious Code Protection
1.00
SI-3(2)Automatic Updates
1.00
SI-4(22)Unauthorized Network Services
1.00
NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.14.1
1.00
3.14.2
1.00
3.14.3
1.00
3.14.4
1.00
3.14.5
1.00
CCI1 mapping
CCI-002624
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (7) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

PR.DS-01
1.00
PR.DS-02
1.00
PR.DS-10
1.00
DE.CM-09
0.50
ID.RA-01
0.50
ID.RA-08
0.50
PR.PS-02
0.50

Who does this work

8 NICE work roles and 7 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-213433r1192798_chk)

This is applicable to unclassified systems. For other systems this is NA. Verify the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Microsoft Defender Antivirus >> MAPS >> "Configure the 'Block at First Sight' feature" is set to "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows Defender\Spynet Criteria: If the value "DisableBlockAtFirstSeen" is REG_DWORD = 0, this is not a finding.

Fix Text (F-14656r1190714_fix)

This is applicable to unclassified systems. For other systems this is NA. Set the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Microsoft Defender Antivirus >> MAPS >> "Configure the 'Block at First Sight' feature" to "Enabled".