OpenControls Logo

STIG Viewer

STIGViewer Support

The Juniper SRX Services Gateway must specify the order in which authentication servers are used.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-229026JUSX-DM-000098SV-229026r961863_ruleCCI-000366low
Description
Specifying an authentication order implements an authentication, authorization, and accounting methods list to be used, thus allowing the implementation of redundant or backup AAA servers. These commands also ensure that a default method or order will not be used by the device (e.g., local passwords). The Juniper SRX must specify the order in which authentication is attempted by including the authentication-order statement in the authentication server configuration. Remote logon using password results in a CAT 1 finding (CCI-000765) for failure to use two-factor authentication. Thus, if the account of last resort uses only password authentication, this configuration prevents remote access. DoD policy is that redundant AAA servers are required to mitigate the risk of a failure of the primary AAA device.
STIGDate
Juniper SRX Services Gateway NDM Security Technical Implementation Guide2024-12-20

Related Frameworks

2 mappings across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (9) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-01Configuration Management Program
1.00
END-01Endpoint Device Management (EDM)
1.00
END-04Malicious Code Protection (Anti-Malware)
1.00
END-06Endpoint File Integrity Monitoring (FIM)
1.00
MON-01Continuous Monitoring
1.00
MON-01.7File Integrity Monitoring (FIM)
1.00
CFG-02Secure Baseline Configurations
0.50
CFG-02.2Automated Central Management & Verification
0.50
CFG-02.7Approved Configuration Deviations
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (100) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-12Session Termination
1.00
AC-16(1)Dynamic Attribute Association
1.00
AC-17(1)Monitoring and Control
1.00
AC-2Account Management
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-24(1)Transmit Access Authorization Information
1.00
AC-25Reference Monitor
1.00

+90 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.4.1
1.00
3.4.2
1.00
CCI2 mappings
CCI-000366
1.00
CCI-000371
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-09
1.00
PR.PS-01
1.00
PR.DS-10
0.50
PR.PSPlatform Security
0.50
PR.PS-05
0.50

Who does this work

10 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-229026r961863_chk)

Verify a RADIUS or TACACS+ server order has been configured. From operational mode enter the command: show system authentication-order If the authentication-order for either or both RADIUS or TACACS+ server order has not been configured, this is a finding. If the authentication-order includes the password method, this is a finding.

Fix Text (F-31318r518255_fix)

Add an external RADIUS or TACACS+ server, and specify the port number and shared secret of the server. Remote logon using password results in a CAT 1 finding (CCI-000765) for failure to use two-factor authentication. Thus, if the account of last resort uses only password authentication, this configuration prevents remote access. DoD policy is that redundant AAA servers are required to mitigate the risk of a failure of the primary AAA device. [edit] set system authentication-order tacplus or [edit] set system authentication-order radius From operational mode enter the command: show system authentication-order If password is set as an option, remove this command from the configuration. [edit] delete system authentication-order password