OpenControls Logo

STIG Viewer

STIGViewer Support

The Juniper Networks SRX Series Gateway IDPS must send an immediate alert to, at a minimum, the Security Control Auditor (SCA) when malicious code is detected.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-214635JUSX-IP-000029SV-214635r383131_ruleCCI-001243medium
Description
Without an alert, security personnel may be unaware of an impending failure of the audit capability, and the ability to perform forensic analysis and detect rate-based and other anomalies will be impeded. The IDPS generates an immediate (within seconds) alert which notifies designated personnel of the incident. Sending a message to an unattended log or console does not meet this requirement since that will not be seen immediately. These messages should include a severity level indicator or code as an indicator of the criticality of the incident.
STIGDate
Juniper SRX Services Gateway IDPS Security Technical Implementation Guide2024-06-10

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (15) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-02Secure Baseline Configurations
1.00
CRY-01Use of Cryptographic Controls
1.00
CRY-01.1Alternate Physical Protection
1.00
CRY-03Transmission Confidentiality
1.00
CRY-04Transmission Integrity
1.00
CRY-05Encrypting Data At Rest
1.00
DCH-01Data Protection
1.00
IAC-21Least Privilege
1.00
END-04Malicious Code Protection (Anti-Malware)
0.50
END-04.1Automatic Antimalware Signature Updates
0.50

+5 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (8) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AU-12Audit Record Generation
1.00
AU-3Content of Audit Records
1.00
SC-7(9)Restrict Threatening Outgoing Communications Traffic
1.00
SI-3Malicious Code Protection
1.00
SI-4(1)System-wide Intrusion Detection System
1.00
SI-4(22)Unauthorized Network Services
1.00
SI-4(5)System-generated Alerts
1.00
SI-6Security and Privacy Function Verification
1.00
NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.14.1
1.00
3.14.2
1.00
3.14.3
1.00
3.14.4
1.00
3.14.5
1.00
CCI1 mapping
CCI-001243
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (7) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

PR.DS-01
1.00
PR.DS-02
1.00
PR.DS-10
1.00
DE.CM-09
0.50
ID.RA-01
0.50
ID.RA-08
0.50
PR.PS-02
0.50

Who does this work

8 NICE work roles and 7 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-214635r383131_chk)

Verify an alert is sent when malicious code is detected. [edit] show security idp policy View the rulebase options for the IDP policies. If the rulebase options for the IDP policies that detect malicious code do not contain the "alert" option, this is a finding.

Fix Text (F-15837r297470_fix)

This requirement can be met using an alert. Alerts must be enabled and configured and then added to the IDP policy rulebase command as an option. The following is an example of the command that can be added to the IDP policy. The policy is called Malicious-Activity and the rule is called R1 in this example. [edit] set security idp idp-policy Malicious-Activity rulebase-ips rule R1 then notification log-attacks alert