OpenControls Logo

STIG Viewer

STIGViewer Support

The IDPS must send an alert to, at a minimum, the ISSO and ISSM when DoS incidents are detected.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-214631JUSX-IP-000025SV-214631r971533_ruleCCI-002664medium
Description
Without an alert, security personnel may be unaware of major detection incidents that require immediate action and this delay may result in the loss or compromise of information. CJCSM 6510.01B, "Cyber Incident Handling Program", lists nine Cyber Incident and Reportable Event Categories. DoD has determined that categories identified by CJCSM 6510.01B Major Indicators (category I, II, IV, and VII detection events) will require an alert when an event is detected. Alerts messages must include a severity level indicator or code as an indicator of the criticality of the incident. Since these incidents require immediate action, these messages are assigned a critical or level 1 priority/severity, depending on the system's priority schema. Alerts may be transmitted, for example, telephonically, by electronic mail messages, or by text messaging. The IDPS must either send the alert to a management console that is actively monitored by authorized personnel or use a messaging capability to send the alert directly to designated personnel. The Juniper SRX IDPS can be configured for email alerts.
STIGDate
Juniper SRX Services Gateway IDPS Security Technical Implementation Guide2024-06-10

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-01.4System Generated Alerts
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (7) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AU-12Audit Record Generation
1.00
AU-3Content of Audit Records
1.00
SC-7(9)Restrict Threatening Outgoing Communications Traffic
1.00
SI-3Malicious Code Protection
1.00
SI-4(1)System-wide Intrusion Detection System
1.00
SI-4(22)Unauthorized Network Services
1.00
SI-4(5)System-generated Alerts
1.00
CCI1 mapping
CCI-002664
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 4 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-01
1.00
PR.PS-04
1.00

Details

Check Text (C-214631r971533_chk)

Verify alerts are configured to implement this requirement. [edit] show security alarms potential-violation If alerts are not configured to notify the ISSO and ISSM of potential-violation IDP events, this is a finding.

Fix Text (F-15833r297458_fix)

Configure alerts for IDP attack by using the [edit security alarms potential-violation] command. Add the option "alert" onto the rule to send an alert when that rule is invoked. Alerts should be sent only on critical and other site-selected items to prevent an excess of alerts. [edit] set security idp idp-policy recommended rulebase-ips rule-1 then notification log-attacks alert