This requirement is not applicable for the DODIN Backbone. Review the router configuration and determine if filters are bound to the applicable interfaces to drop IPv6 packets containing a Destination Option header with option type value of 0xC3 (NSAP address). The following example will block any inbound IPv6 packet containing a Destination Option header: Step 1: Verify that all external IPv6-enabled interfaces have an IPv6 filter as shown in the example below. interfaces { ge-0/0/0 { unit 0 { family inet6 { filter { input IPV6-INGRESS-FILTER; } address 2001:1:0:146::1/64; } } } } Step 2: Verify that the IPV6 filter blocks all packets with a Destination Option header as shown in the example below. firewall { family inet6 { filter IPV6-INGRESS-FILTER { term DEST_ OPT_HEADER { from { next-header dstops; } then { syslog; discard; } } term ALLOW_TCP_ESTABLISHED { from { next-header tcp; tcp-established; } then accept; } term DENY_BY_DEFAULT { then { syslog; discard; } } } } } Note: Currently JUNOS has no method to filter option type within Destination Option header. Hence, all packets with the Destination Option header must be dropped. If the router is not configured to drop IPv6 packets containing the NSAP address option within Destination Option header, this is a finding.