OpenControls Logo

STIG Viewer

STIGViewer Support

The Juniper PE router must be configured with Unicast Reverse Path Forwarding (uRPF) loose mode enabled on all CE-facing interfaces.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-217077JUNI-RT-000720SV-217077r604135_ruleCCI-001097medium
Description
The uRPF feature is a defense against spoofing and denial-of-service (DoS) attacks by verifying if the source address of any ingress packet is reachable. To mitigate attacks that rely on forged source addresses, all provider edge routers must enable uRPF loose mode to guarantee that all packets received from a CE router contain source addresses that are in the route table.
STIGDate
Juniper Router RTR Security Technical Implementation Guide2024-12-05

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (18) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CFG-02Secure Baseline Configurations
1.00
CRY-01Use of Cryptographic Controls
1.00
CRY-01.1Alternate Physical Protection
1.00
CRY-03Transmission Confidentiality
1.00
CRY-04Transmission Integrity
1.00
CRY-05Encrypting Data At Rest
1.00
DCH-01Data Protection
1.00
IAC-21Least Privilege
1.00
MON-01Continuous Monitoring
1.00
MON-01.1Intrusion Detection & Prevention Systems (IDS & IPS)
1.00

+8 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (10) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CM-6Configuration Settings
1.00
SC-24Fail in Known State
1.00
SC-47Alternate Communications Paths
1.00
SC-5Denial-of-service Protection
1.00
SC-7Boundary Protection
1.00
SC-7(11)Restrict Incoming Communications Traffic
1.00
SC-7(29)Separate Subnets to Isolate Functions
1.00
SC-7(5)Deny by Default — Allow by Exception
1.00
SI-4System Monitoring
1.00
SI-4(11)Analyze Communications Traffic Anomalies
1.00
NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.13.1
1.00
3.13.2
1.00
3.13.5
1.00
CCI1 mapping
CCI-001097
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (5) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-01
1.00
PR.DS-01
1.00
PR.DS-02
1.00
PR.DS-10
1.00
PR.IR-01
1.00

Who does this work

15 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-217077r604135_chk)

Review the router configuration to determine if uRPF loose mode is enabled on all CE-facing interfaces. interfaces { ge-0/1/0 { description "link to Customer 2"; unit 0 { family inet { rpf-check { mode loose; } address x.x.x.x/30; } } } If uRPF loose mode is not enabled on all CE-facing interfaces, this is a finding.

Fix Text (F-18304r297100_fix)

Configure uRPF loose mode on all CE-facing interfaces as shown in the example. [edit interfaces ge-0/1/0 unit 0 family inet] set rpf-check mode loose