OpenControls Logo

STIG Viewer

STIGViewer Support

The Juniper router must be configured to log all packets that have been dropped.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-217025JUNI-RT-000200SV-217025r604135_ruleCCI-000134low
Description
Auditing and logging are key components of any security architecture. It is essential for security personnel to know what is being done or attempted to be done, and by whom, to compile an accurate risk assessment. Auditing the actions on network devices provides a means to recreate an attack or identify a configuration mistake on the device.
STIGDate
Juniper Router RTR Security Technical Implementation Guide2024-12-05

Related Frameworks

1 mapping across 5 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-01Continuous Monitoring
1.00
MON-01.4System Generated Alerts
1.00
MON-03Content of Event Logs
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (64) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-16Security and Privacy Attributes
1.00
AC-17(1)Monitoring and Control
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(10)Shared and Group Account Credential Change
1.00
AC-2(2)Automated Temporary and Emergency Account Management
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00
AC-3(3)Mandatory Access Control
1.00
AC-4Information Flow Enforcement
1.00

+54 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.3.1
1.00
3.3.2
1.00
CCI1 mapping
CCI-000134
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

PR.PS-04
1.00

Who does this work

6 NICE work roles and 5 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-217025r604135_chk)

Review all filters to verify that packets that are discarded or rejected are logged as shown in the configuration below. firewall { family inet { filter XYZ … … … } term DENY_BY_DEFAULT { then { syslog; discard; } } } } Verify that logging is enabled to capture packets that are dropped as shown in the configuration below. system { host-name XYZ; … … … } syslog { file LOG_FILE { firewall any; } } } Note: The “any” parameter can be configured in lieu of the “firewall” parameter. If packets being dropped are not logged, this is a finding.

Fix Text (F-18252r296944_fix)

Configure the firewall terms that discards or rejects packets to log the action as shown in the example below. [edit firewall family inet] set filter FILTER_INBOUND term DENY_BY_DEFAULT then syslog discard Configure logging to record packets being dropped by firewall filters as shown in the example below. [edit system syslog] set file LOG_FILE firewall any Note: The “any” parameter can be configured in lieu of the “firewall” parameter.