The Juniper router must be configured to generate log records for privileged activities.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
| V-217346 | JUNI-ND-001260 | SV-217346r961827_rule | CCI-000172 | medium |
| Description | ||||
| Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the network device (e.g., module or policy filter). | ||||
| STIG | Date | |||
| Juniper Router NDM Security Technical Implementation Guide | 2024-12-05 | |||
Related Frameworks
4 paths across 3 frameworks
Related Frameworks
NIST 800-531 mapping
AU-12
1.00
- DISA · V3R2 · disa_xccdf · related
- DISA · 2025-01-23 · disa_cci_list · equivalent
NIST 800-1712 mappings
3.3.1
1.00
- DISA · V3R2 · disa_xccdf · related
- DISA · 2025-01-23 · disa_cci_list · equivalent
- NIST · Rev 2 (Feb 2020, errata Jan 2021) · nist_800_171_app_d · equivalent
3.3.2
1.00
- DISA · V3R2 · disa_xccdf · related
- DISA · 2025-01-23 · disa_cci_list · equivalent
- NIST · Rev 2 (Feb 2020, errata Jan 2021) · nist_800_171_app_d · equivalent
CCI1 mapping
CCI-000172
1.00
- DISA · V3R2 · disa_xccdf · related
Details
Check Text (C-217346r961827_chk)
Review the router configuration to verify that it is compliant with this requirement as shown in the example configurations below.
syslog {
file LOG_FILE {
change-log info;
interactive-commands info;
}
}
Note: The parameter "any" can be in place of "change-log" and “interactive-commands” as this will log everything. Also, a syslog server can be configured in addition to or in lieu of logging to a file as shown in the example below.
system {
syslog {
host x.x.x.x {
any info;
}
}
If the router is not configured to generate log records for privileged activities, this is a finding.
Fix Text (F-18571r296617_fix)
Configure the router to generate log records for privileged activities as shown in the example below.
[edit system]
set syslog file LOG_FILE change-log info
set syslog file LOG_FILE interactive-commands info
Note: The parameter "any" can be in place of "change-log" and “interactive-commands” as this will log everything. Also, a syslog server can be configured in addition to or in lieu of logging to a file as shown in the example below.
set syslog host x.x.x.x any info