OpenControls Logo

STIG Viewer

STIGViewer Support

The Juniper multicast RP router must be configured to limit the multicast forwarding cache so that its resources are not saturated by managing an overwhelming number of PIM and MSDP source-active entries.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-254040JUEX-RT-000680SV-254040r997535_ruleCCI-002385low
Description
MSDP peering between networks enables sharing of multicast source information. Enclaves with an existing multicast topology using PIM-SM can configure their RP routers to peer with MSDP routers. As a first step of defense against a denial-of-service (DoS) attack, all RP routers must limit the multicast forwarding cache to ensure that router resources are not saturated managing an overwhelming number of PIM and MSDP source-active entries.
STIGDate
Juniper EX Series Switches Router Security Technical Implementation Guide2024-06-10

Related Frameworks

2 mappings across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (13) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-01Continuous Monitoring
1.00
MON-01.1Intrusion Detection & Prevention Systems (IDS & IPS)
1.00
MON-01.3Inbound & Outbound Communications Traffic
1.00
MON-01.4System Generated Alerts
1.00
MON-01.8Security Event Monitoring
1.00
NET-01Network Security Controls (NSC)
1.00
NET-02Layered Network Defenses
1.00
SEA-01Secure Engineering Principles
1.00
SEA-02Alignment With Enterprise Architecture
1.00
CAP-01Capacity & Performance Management
0.50

+3 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (37) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-10Concurrent Session Control
1.00
AC-17(9)Disconnect or Disable Access
1.00
AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00
AC-4Information Flow Enforcement
1.00
AC-6(9)Log Use of Privileged Functions
1.00
AU-12Audit Record Generation
1.00
AU-3Content of Audit Records
1.00
AU-5Response to Audit Logging Process Failures
1.00
CM-11(2)Software Installation with Privileged Status
1.00

+27 more (top 10 by confidence shown)

CCI2 mappings
CCI-002385
1.00
CCI-004866
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-01
1.00
PR.IR-01
1.00
PR.IR-04
0.50

Who does this work

12 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-254040r997535_chk)

Review the router configuration to determine if forwarding cache thresholds are defined. [edit routing-options] multicast { forwarding-cache { threshold { suppress <1..200000>; reuse <1..200000>; log-warning <percent to generate warning>; } } } If the RP router is not configured to limit the multicast forwarding cache to ensure that its resources are not saturated, this is a finding.

Fix Text (F-57443r844152_fix)

Configure MSDP-enabled RP routers to limit the multicast forwarding cache for source-active entries. set routing-options multicast forwarding-cache threshold suppress <1..200000> set routing-options multicast forwarding-cache threshold reuse <1..200000> set routing-options multicast forwarding-cache threshold log-warning <percent to generate warning>