OpenControls Logo

STIG Viewer

STIGViewer Support

The Juniper layer 2 switch must be configured to disable all dynamic VLAN registration protocols.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-253950JUEX-L2-000030SV-253950r843883_ruleCCI-000803medium
Description
Dynamic VLAN registration protocols provide centralized management of VLAN domains, which can reduce administration in a switched network. Interfaces are assigned to VLANs and the VLAN is dynamically registered on the trunked interface. Removing the last active interface from the VLAN automatically prunes the VLAN from the trunked interface, preserving bandwidth. Member switches remain synchronized via the exchange of Protocol Data Units (PDU). Protocols like Cisco VLAN Trunk Protocol (VTP) and IEEE 802.1ak Multiple VLAN Registration Protocol (MVRP) permit dynamically registering/de-registering VLANs on trunked interfaces. Without authentication, forged PDUs can allow access to previously inaccessible VLANs, or inclusion of unauthorized VLANs or switches. Only VTP currently supports authentication.
STIGDate
Juniper EX Series Switches Layer 2 Switch Security Technical Implementation Guide2025-12-10

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (7) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

IAC-01.2Authenticate, Authorize and Audit (AAA)
1.00
IAC-02Identification & Authentication for Organizational Users
1.00
IAC-03Identification & Authentication for Non-Organizational Users
1.00
IAC-04Identification & Authentication for Devices
1.00
IAC-05Identification & Authentication for Third-Party Technology Assets, Applications and/or Services (TAAS)
1.00
CRY-02Automated Authentication Through Cryptographic Modules
0.50
IAC-12Cryptographic Module Authentication
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (36) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-17(1)Monitoring and Control
1.00
AC-17(2)Protection of Confidentiality and Integrity Using Encryption
1.00
AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00
AC-4Information Flow Enforcement
1.00
AC-4(17)Domain Authentication
1.00
AC-6(9)Log Use of Privileged Functions
1.00
AU-12Audit Record Generation
1.00
AU-3Content of Audit Records
1.00
CM-5(1)Automated Access Enforcement and Audit Records
1.00

+26 more (top 10 by confidence shown)

CCI1 mapping
CCI-000803
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

PR.AA-01
1.00
PR.AA-03
1.00

Who does this work

7 NICE work roles and 5 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-253950r843883_chk)

Review the switch configuration to verify if dynamic VLAN registration protocols are enabled. If dynamic VLAN registration protocols are enabled, verify that authentication has been configured. Juniper switches do not support VTP. Although Juniper switches support MVRP, it is disabled by default (there is no [edit protocols mvrp] stanza). Verify MVRP is not enabled as shown below. [edit protocols] mvrp { interface <name>; } If dynamic VLAN registration protocols have been configured on the switch and are not authenticating messages with a hash function using the most secured cryptographic algorithm available, this is a finding.

Fix Text (F-57353r843882_fix)

Configure the switch to disable all dynamic VLAN registration protocols. delete protocols mvrp