OpenControls Logo

STIG Viewer

STIGViewer Support

The Juniper EX switch must be configured to enable BPDU Protection on all user-facing or untrusted access switch ports.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-253956JUEX-L2-000090SV-253956r843901_ruleCCI-002385medium
Description
If a rogue switch is introduced into the topology and transmits a Bridge Protocol Data Unit (BPDU) with a lower bridge priority than the existing root bridge, it will become the new root bridge and cause a topology change, rendering the network in a suboptimal state. BPDU Protection allows network designers to enforce the STP domain borders and keep the active topology predictable. The devices behind interfaces that have BPDU Protection enabled are not able to influence the STP topology. At the reception of BPDUs, BPDU Protection disables the port and logs the condition.
STIGDate
Juniper EX Series Switches Layer 2 Switch Security Technical Implementation Guide2026-06-03

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (13) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-01Continuous Monitoring
1.00
MON-01.1Intrusion Detection & Prevention Systems (IDS & IPS)
1.00
MON-01.3Inbound & Outbound Communications Traffic
1.00
MON-01.4System Generated Alerts
1.00
MON-01.8Security Event Monitoring
1.00
NET-01Network Security Controls (NSC)
1.00
NET-02Layered Network Defenses
1.00
SEA-01Secure Engineering Principles
1.00
SEA-02Alignment With Enterprise Architecture
1.00
CAP-01Capacity & Performance Management
0.50

+3 more (top 10 by confidence shown)

NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (36) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-10Concurrent Session Control
1.00
AC-17(9)Disconnect or Disable Access
1.00
AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00
AC-4Information Flow Enforcement
1.00
AC-6(9)Log Use of Privileged Functions
1.00
AU-12Audit Record Generation
1.00
AU-3Content of Audit Records
1.00
AU-5Response to Audit Logging Process Failures
1.00
CM-11(2)Software Installation with Privileged Status
1.00

+26 more (top 10 by confidence shown)

CCI1 mapping
CCI-002385
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (3) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

DE.CM-01
1.00
PR.IR-01
1.00
PR.IR-04
0.50

Who does this work

12 NICE work roles and 9 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-253956r843901_chk)

Review the switch configuration to verify that BPDU Protection is enabled on all user-facing or untrusted access switch interfaces. BPDU Protection discards all BPDUs received on a configured interface and stops forwarding on that interface. In contrast, Root Protection discards only superior root BPDUs but accepts remaining BPDU types. Verify BDPU Protection (bpdu-block-on-edge) and the edge interfaces where no BPDUs are expected. [protocols] mstp { bpdu-block-on-edge; interface <interface name> { edge; } } Note: Configuring BPDU Protection and Root Protection on the same interface is supported, but redundant because BPDU protection includes Root Protection. If the switch has not enabled BPDU Protection, this is a finding.

Fix Text (F-57359r843900_fix)

Configure the switch to have BPDU Protection enabled on all user-facing or untrusted access switch interfaces. set protocols mstp bpdu-block-on-edge set protocols mstp interface <interface name> edge Note: Configuring BPDU Protection and Root Protection on the same interface is supported, but redundant because BPDU protection includes Root Protection.