STIGViewer Support

Sentry must initiate a session lock after a 15-minute period of inactivity.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-250984MOIS-ND-000050SV-250984r1028211_ruleCCI-000057medium
Description
A session lock is a temporary network device or administrator-initiated action taken when the administrator stops work but does not log out of the network device. Rather than relying on the user to manually lock their management session prior to vacating the vicinity, network devices need to be able to identify when a management session has idled and take action to initiate the session lock. Once invoked, the session lock shall remain in place until the administrator reauthenticates. No other system activity aside from reauthentication shall unlock the management session. Note that CCI-001133 requires that administrative network sessions be disconnected after 10 minutes of idle time. So this requirement may only apply to local administrative sessions.
STIGDate
Ivanti Sentry 9.x NDM Security Technical Implementation Guide2024-09-25

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

IAC-24Session Lock
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (18) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-11Device Lock
1.00
AC-11(1)Pattern-hiding Displays
1.00
AC-12Session Termination
1.00
AC-12(2)Termination Message
1.00
AU-10Non-repudiation
1.00
CM-7Least Functionality
1.00
IA-11Re-authentication
1.00
IA-2Identification and Authentication (Organizational Users)
1.00
IA-2(1)Multi-factor Authentication to Privileged Accounts
1.00
IA-2(12)Acceptance of PIV Credentials
1.00

+8 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.1.10
1.00
CCI1 mapping

Details

Check Text (C-250984r1028211_chk)

Verify the System manager Timeout is set to 15 minutes. 1. Log in to the Sentry System Manager. 2. Navigate to Settings >> Timeout. 3. Verify the System Manager timeout is set to 15. If the System Manager timeout is not set to 15, this is a finding.

Fix Text (F-54373r1004828_fix)

Set the System Manager Timeout to 15 minutes. 1. Log in to the Sentry System Manager. 2. Navigate to Settings >> Timeout. 3. Configure the System Manager timeout to 15. 4. Click "Apply" and "Save" in the top right corner.