OpenControls Logo

STIG Viewer

STIGViewer Support

The Ivanti EPMM server must be configured with the periodicity of the following commands to the agent of six hours or less: - query connectivity status - query the current version of the managed device firmware/software - query the current version of installed mobile applications - read audit logs kept by the managed device.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-251419IMIC-11-010900SV-251419r1004746_ruleCCI-002696medium
Description
Without verification, security functions may not operate correctly and this failure may go unnoticed. Security function is defined as the hardware, software, and/or firmware of the information system responsible for enforcing the system security policy and supporting the isolation of code and data on which the protection is based. Security functionality includes, but is not limited to, establishing system accounts, configuring access authorizations (i.e., permissions, privileges), setting events to be audited, and setting intrusion detection parameters. This requirement applies to applications performing security functions and the applications performing security function verification/testing. Satisfies: FAU_NET_EXT.1.1, FMT_SMF.1.1(2) c.3 Reference: PP-MDM-411057
STIGDate
Ivanti EPMM Server Security Technical Implementation Guide2024-07-30

Related Frameworks

1 mapping across 3 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CHG-06Control Functionality Verification
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (14) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-3(4)Discretionary Access Control
1.00
AU-12Audit Record Generation
1.00
AU-3Content of Audit Records
1.00
AU-3(1)Additional Audit Information
1.00
AU-8Time Stamps
1.00
AU-9Protection of Audit Information
1.00
CM-3(5)Automated Security Response
1.00
CM-5(1)Automated Access Enforcement and Audit Records
1.00
CM-5(6)Limit Library Privileges
1.00
CM-7(2)Prevent Program Execution
1.00

+4 more (top 10 by confidence shown)

CCI1 mapping
CCI-002696
1.00

Details

Check Text (C-251419r1004746_chk)

Review the MDM server configuration settings and verify the server is configured with a periodicity for reachable events of six hours or less for the following commands to the agent: - query connectivity status; - query the current version of the MD firmware/software; - query the current version of the hardware model of the device; - query the current version of installed mobile applications; - read audit logs kept by the MD. Verify the sync interval for a device: 1. In the Admin Portal, go to Policies & Config >> Policies. 2. Select the default sync policy. 3. Verify that the Sync Interval is set to 360 minutes or less. If the Sync interval is not set to 360 minutes or less, this is a finding.

Fix Text (F-54807r806388_fix)

Configure the MDM server with a periodicity for reachable events of six hours or less for the following commands to the agent: - query connectivity status; - query the current version of the MD firmware/software; - query the current version of the hardware model of the device; - query the current version of installed mobile applications; -read audit logs kept by the MD. Configure the sync interval for a device: To configure the frequency for starting the synchronization process between a device in MobileIron Core: 1. In the Admin Portal, go to Policies & Config >> Policies. 2. Select the default sync policy. 3. Set Sync Interval to the number of minutes between synchronizations to be 360 minutes or less. 4. Click "Save".