OpenControls Logo

STIG Viewer

STIGViewer Support

The ICS must be configured to terminate after five minutes of inactivity except to fulfill documented and validated mission requirements.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-258608IVCS-NM-000300SV-258608r1136931_ruleCCI-001133high
Description
Terminating an idle session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended. In addition, quickly terminating an idle session will also free up resources committed by the managed network element. Terminating network connections associated with communications sessions includes, for example, deallocating associated TCP/IP address/port pairs at the operating system level, or deallocating networking assignments at the application level if multiple application sessions are using a single, operating system-level network connection. This does not mean that the device terminates all sessions or network access; it only ends the inactive session and releases the resources associated with that session. Upon the termination of a session, the Ivanti ICS inherently ends the inactive session and releases the resources associated with that session.
STIGDate
Ivanti Connect Secure NDM Security Technical Implementation Guide2025-09-09

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

NET-07Network Connection Termination
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (24) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-11Device Lock
1.00
AC-11(1)Pattern-hiding Displays
1.00
AC-12Session Termination
1.00
AC-12(2)Termination Message
1.00
AC-2(1)Automated System Account Management
1.00
AC-2(11)Usage Conditions
1.00
AC-2(2)Automated Temporary and Emergency Account Management
1.00
AC-2(3)Disable Accounts
1.00
AC-2(4)Automated Audit Actions
1.00
AC-7Unsuccessful Logon Attempts
1.00

+14 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.13.9
1.00
CCI1 mapping
CCI-001133
1.00

Details

Check Text (C-258608r1136931_chk)

In the ICS Web UI, navigate to Administrators >> Admins Role >> Delegated Admin Roles. 1. Click the configured admin role being used for CAC/PKI token admin logins (by default it is .Administrators). 2. Click the Session Options tab. 3. In the "Session Lifetime" section, verify the Idle Timeout is set to "5". If the ICS does not terminate after 10 minutes of inactivity except to fulfill documented and validated mission requirements, this is a finding.

Fix Text (F-62257r1136876_fix)

In the ICS Web UI, navigate to Administrators >> Admins Role >> Delegated Admin Roles. 1. Click the configured admin role being used for CAC/PKI token admin logins. By default it is Administrators. 2. Click the Session Options tab. 3. In the "Session Lifetime" section, set the Idle Timeout to "5". 4. Click "Save Changes".