OpenControls Logo

STIG Viewer

STIGViewer Support

The ICS must be configured to implement cryptographic mechanisms using a FIPS 140-2/140-3 approved algorithm.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-258598IVCS-NM-000010SV-258598r1028331_ruleCCI-003123high
Description
If unsecured protocols (lacking cryptographic mechanisms) are used for sessions, the contents of those sessions will be susceptible to eavesdropping, potentially putting sensitive data (including administrator passwords) at risk of compromise and potentially allowing hijacking of maintenance sessions. When JITC mode is enabled, it also enables FIPS mode is also automatically enabled. However, this requirement focuses only on the use of FIPS validated encryption algorithms and protocols.
STIGDate
Ivanti Connect Secure NDM Security Technical Implementation Guide2025-09-09

Related Frameworks

1 mapping across 3 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MNT-05.3Remote Maintenance Cryptographic Protection
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (26) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-17(1)Monitoring and Control
1.00
AC-17(2)Protection of Confidentiality and Integrity Using Encryption
1.00
AC-2(4)Automated Audit Actions
1.00
AC-4Information Flow Enforcement
1.00
AC-6(9)Log Use of Privileged Functions
1.00
AU-12Audit Record Generation
1.00
AU-3Content of Audit Records
1.00
AU-9(3)Cryptographic Protection
1.00
CM-5(1)Automated Access Enforcement and Audit Records
1.00
CM-6Configuration Settings
1.00

+16 more (top 10 by confidence shown)

CCI1 mapping
CCI-003123
1.00

Details

Check Text (C-258598r1028331_chk)

In the ICS Web UI, navigate to System >> Configuration >> Security >> Inbound SSL Options. Verify "Turn on FIPS mode" checkbox is enabled (checked). If the use of FIPS 140-2/140-3 approved algorithms is not enabled, this is a finding.

Fix Text (F-62247r1028330_fix)

Enable compliance modes to ensure only FIPS 140-2/140-3 algorithms are used. Once "Turn on JITC mode" is checked, "Turn on NDcPP mode" and "Turn on FIPS mode" are also checked automatically; however, the focus of this requirement is on enabling FIPS mode. The following procedure is the preferred DOD process. In the ICS Web UI, navigate to System >> Configuration >> Security >> Inbound SSL Options. 1. Under "DOD Certification Option", check (enabled) "Turn on JITC mode" to enable the JITC mode security features. 2. Click "Save changes" and confirm after the web UI asks for SSL cipher configuration changes.