OpenControls Logo

STIG Viewer

STIGViewer Support

The IDPS must fail to a secure state which maintains access control mechanisms when the IDPS hardware, software, or firmware fails on initialization/shutdown or experiences a sudden abort during normal operation.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-206884SRG-NET-000235-IDPS-00169SV-206884r383119_ruleCCI-001190medium
Description
Failure to a known safe state helps prevent systems from failing to a state that may cause loss of data or unauthorized access to system resources. Preserving information system state information also facilitates system restart and return to the operational mode of the organization with less disruption to mission-essential processes. This requirement applies to the device itself, not the network traffic. Abort refers to stopping a program or function before it has finished naturally. The term abort refers to both requested and unexpected terminations. Since it is usually not possible to test this capability in a production environment, systems should either be validated in a testing environment or prior to installation. This requirement is usually a function of the design of the IDPS component. Compliance can be verified by acceptance/validation processes or vendor attestation.
STIGDate
Intrusion Detection and Prevention Systems Security Requirements Guide2025-09-22

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (9) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

BCD-01Business Continuity Management System (BCMS)
1.00
CFG-02Secure Baseline Configurations
1.00
CRY-01Use of Cryptographic Controls
1.00
DCH-01Data Protection
1.00
IAC-21Least Privilege
1.00
SEA-01Secure Engineering Principles
1.00
SEA-01.2Achieving Resilience Requirements
1.00
SEA-02Alignment With Enterprise Architecture
1.00
SEA-07.2Fail Secure
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (7) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AU-3(2)Centralized Management of Planned Audit Record Content
1.00
AU-5Response to Audit Logging Process Failures
1.00
SC-24Fail in Known State
1.00
SC-5Denial-of-service Protection
1.00
SC-7Boundary Protection
1.00
SC-7(11)Restrict Incoming Communications Traffic
1.00
SC-7(5)Deny by Default — Allow by Exception
1.00
CCI1 mapping
CCI-001190
1.00
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

PR.DS-10
1.00
PR.IR-03
1.00

Who does this work

13 NICE work roles and 8 EC-Council certifications.

This is an inference across published mappings, not a single claim by anyone. This check maps to a control, which maps to a Cybersecurity Framework outcome, which NIST assigns to the work roles below. EC-Council separately maps its certifications to those same roles.

A certification prepares someone for a role. It is not evidence that a holder is qualified, and neither NIST nor EC-Council has stated that any certification here addresses this check.

Work-role assignments published by NIST (NICE Framework Components 2.2.0 and the CSF 2.0 OLIR crosswalk). Certification mappings published by EC-Council.

Details

Check Text (C-206884r383119_chk)

Verify the IDPS fails to a secure state which maintains access control mechanisms when the IDPS hardware, software, or firmware fails on initialization/shutdown or experiences a sudden abort during normal operation. If the IDPS does not fail to a secure state which maintains access control mechanisms when the IDPS hardware, software, or firmware fails on initialization/shutdown or experiences a sudden abort during normal operation, this is a finding.

Fix Text (F-7138r298165_fix)

Configure the IDPS to fail to a secure state which maintains access control mechanisms when the IDPS hardware, software, or firmware fails on initialization/shutdown or experiences a sudden abort during normal operation.