STIGViewer Support

The IPS must block outbound traffic containing known and unknown denial-of-service (DoS) attacks by ensuring that security policies, signatures, rules, and anomaly detection techniques are applied to outbound communications traffic.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-206881SRG-NET-000192-IDPS-00140SV-206881r1140706_ruleCCI-001095medium
Description
The IPS must include protection against DoS attacks originating from inside the enclave that can affect either internal or external systems. These attacks may use legitimate or rogue endpoints from inside the enclave. Installation of IPS detection and prevention components (i.e., sensors) at key boundaries in the architecture mitigates the risk of DoS attacks. These attacks can be detected by matching observed communications traffic with patterns of known attacks and monitoring for anomalies in traffic volume/type. To comply with this requirement, the IPS must inspect outbound traffic for indications of known and unknown DoS attacks. Sensor log capacity management, along with techniques that prevent the logging of redundant information during an attack, also guard against DoS attacks. This requirement is used in conjunction with other requirements that require configuration of security policies, signatures, rules, and anomaly detection techniques and are applicable to both inbound and outbound traffic.
STIGDate
Intrusion Detection and Prevention Systems Security Requirements Guide2025-09-22

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (2) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

CAP-02Resource Priority
0.50
CAP-03Capacity Planning
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (13) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-17(10)Authenticate Remote Commands
1.00
AC-17(9)Disconnect or Disable Access
1.00
AC-3Access Enforcement
1.00
AC-4Information Flow Enforcement
1.00
AU-3Content of Audit Records
1.00
CM-6Configuration Settings
1.00
CM-7Least Functionality
1.00
CM-7(2)Prevent Program Execution
1.00
SC-47Alternate Communications Paths
1.00
SC-5Denial-of-service Protection
1.00

+3 more (top 10 by confidence shown)

CCI1 mapping
NIST CSF 2.00 mappings

No source states a mapping between these directly.

Also reachable in 4 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

Details

Check Text (C-206881r1140706_chk)

If the device being reviews is an IDS, this is not applicable. Verify the IPS blocks outbound traffic containing known and unknown DoS attacks by ensuring that security policies, signatures, rules, and anomaly detection techniques are applied to outbound communications traffic. If the IPS does not block outbound traffic containing known and unknown DoS attacks, by ensuring that security policies, signatures, rules, and anomaly detection techniques are applied to outbound communications traffic, this is a finding.

Fix Text (F-7135r1137727_fix)

Configure the IPS to block outbound traffic containing known and unknown DoS attacks, by ensuring that security policies, signatures, rules, and anomaly detection techniques are applied to outbound communications traffic.