STIGViewer Support

IBM z/OS NOBUFFS in SMFPRMxx must be properly set (default is MSG).

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-224075TSS0-US-000020SV-224075r1038966_ruleCCI-000140medium
Description
It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without this notification, the security personnel may be unaware of an impending failure of the audit capability, and system operation may be adversely affected. Audit processing failures include software/hardware errors, failures in the audit capturing mechanisms, and audit storage capacity being reached or exceeded. This requirement applies to each audit data storage repository (i.e., distinct information system component where audit records are stored), the centralized audit storage capacity of organizations (i.e., all audit data storage repositories combined), or both.
STIGDate
IBM z/OS TSS Security Technical Implementation Guide2026-06-15

Related Frameworks

1 mapping across 4 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-05Response To Event Log Processing Failures
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (24) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-2(4)Automated Audit Actions
1.00
AC-3Access Enforcement
1.00
AC-6(9)Log Use of Privileged Functions
1.00
AU-10Non-repudiation
1.00
AU-12Audit Record Generation
1.00
AU-14(1)System Start-up
1.00
AU-3Content of Audit Records
1.00
AU-3(1)Additional Audit Information
1.00
AU-3(2)Centralized Management of Planned Audit Record Content
1.00
AU-4Audit Log Storage Capacity
1.00

+14 more (top 10 by confidence shown)

NIST 800-1710 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

3.3.4
1.00
CCI1 mapping

Details

Check Text (C-224075r1038966_chk)

Refer to IEASYS00 member in SYS1.PARMLIB Concatenation. Determine proper SMFPRMxx member in SYS1.PARMLIB. If NOBUFFS is set to "HALT", this is not a finding. Note: If availability is an overriding concern NOBUFFS can be set to MSG.

Fix Text (F-25736r516625_fix)

Configure NOBUFFS to "HALT" unless availability is an overriding concern then NOBUFFS can be set to MSG.