OpenControls Logo

STIG Viewer

STIGViewer Support

The HPE Alletra Storage ArcusOS device must be configured to collect and send SNMPv3 notifications.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-283403ASMP-ND-000770SV-283403r1194903_ruleCCI-001858medium
Description
It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without a real-time alert, security personnel may be unaware of an impending failure of the audit capability and system operation may be adversely affected. Alerts provide organizations with urgent messages. Real-time alerts provide these messages immediately (i.e., the time from event detection to alert occurs in seconds or less). Without authenticating devices, unidentified or unknown devices may be introduced, thereby facilitating malicious activity. Bidirectional authentication provides stronger safeguards to validate the identity of other devices for connections that are of greater risk. A local connection is any connection with a device communicating without using a network. A network connection is any connection with a device that communicates through a network (e.g., local area or wide area network; internet). A remote connection is any connection with a device communicating through an external network (e.g., the internet). Because of the challenges of applying this requirement on a large scale, organizations are encouraged to only apply the requirement to those limited number (and type) of devices that truly need to support this capability.
STIGDate
HPE Alletra Storage ArcusOS Network Device Management Security Technical Implementation Guide2026-03-03

Related Frameworks

1 mapping across 3 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-05.1Real-Time Alerts of Event Logging Failure
0.50
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (22) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AC-2(4)Automated Audit Actions
1.00
AU-12Audit Record Generation
1.00
AU-14(1)System Start-up
1.00
AU-3Content of Audit Records
1.00
AU-3(1)Additional Audit Information
1.00
AU-4Audit Log Storage Capacity
1.00
AU-4(1)Transfer to Alternate Storage
1.00
AU-5Response to Audit Logging Process Failures
1.00
AU-5(1)Storage Capacity Warning
1.00
AU-5(2)Real-time Alerts
1.00

+12 more (top 10 by confidence shown)

CCI1 mapping
CCI-001858
1.00

Details

Check Text (C-283403r1194903_chk)

Identify the SNMP trap recipient and report SNMP configuration with the following command: cli% showsnmpmgr HostIP Port SNMPVersion User Notify AlertClear <snmp trap recipient IP> 162 3 Alletrasnmpuser standard standard If the SNMP trap recipient IP address is incorrect, this is a finding. If the SNMP port is not "162", this is a finding. If the SNMP version is not "3", this is a finding. If the SNMP user ID is incorrect, this is a finding.

Fix Text (F-87873r1194902_fix)

Configure SNMPv3 alert notifications using the following sequence of operations: Add the IP address of the SNMPv3 trap recipient, where permissions of the account are used. cli% addsnmpmgr -version 3 -snmpuser Alletrasnmpuser <ip address>