OpenControls Logo

STIG Viewer

STIGViewer Support

The HPE Alletra Storage ArcusOS device must allocate a set number of audit records that can be stored on the system in accordance with organization-defined audit record storage requirements.

Overview

Finding IDVersionRule IDIA ControlsSeverity
V-283401ASMP-ND-000750SV-283401r1194897_ruleCCI-001849medium
Description
Network devices must be able to allocate audit record storage capacity to ensure sufficient storage capacity in which to write the audit logs. The task of allocating audit record storage capacity is usually performed during initial device setup if it is modifiable. The value for the organization-defined audit record storage requirement will depend on the amount of storage available on the network device, the anticipated volume of logs, the frequency of transfer from the network device to centralized log servers, and other factors.
STIGDate
HPE Alletra Storage ArcusOS Network Device Management Security Technical Implementation Guide2026-03-03

Related Frameworks

1 mapping across 3 frameworks
SCF0 mappings

No source states a mapping between these directly.

Also reachable in 3 hops (1) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

MON-04Event Log Storage Capacity
1.00
NIST 800-530 mappings

No source states a mapping between these directly.

Also reachable in 2 hops (14) derived by us, not asserted by any source

Each of these is a route we composed by chaining published mappings. No publisher states a relationship between the two endpoints.

AU-12Audit Record Generation
1.00
AU-14(1)System Start-up
1.00
AU-3Content of Audit Records
1.00
AU-3(1)Additional Audit Information
1.00
AU-4Audit Log Storage Capacity
1.00
AU-4(1)Transfer to Alternate Storage
1.00
AU-5Response to Audit Logging Process Failures
1.00
AU-5(1)Storage Capacity Warning
1.00
AU-5(2)Real-time Alerts
1.00
AU-7Audit Record Reduction and Report Generation
1.00

+4 more (top 10 by confidence shown)

CCI1 mapping
CCI-001849
1.00

Details

Check Text (C-283401r1194897_chk)

Verify the system is configured to limit the number of event logs stored on the system with the following command: cli% showsys -param ----------Parameter----------- ----Value---- RawSpaceAlertSSD : 100 RawSpaceAlertQLC : 0 RemoteSyslog : 1 RemoteSyslogHost : 16.172.70.122 RemoteSyslogProfile : None RemoteSyslogSecurityHost: 16.172.70.200 SparingAlgorithm: Default EventLogSize: 10M EventLogNum : 30 If "EventLogNum" is set to a value less than "30", this is a finding.

Fix Text (F-87871r1194896_fix)

Configure the system to limit the number of event logs stored: cli% setsys EventLogNum 30